Supported metrics for Microsoft.ManagedNetworkFabric/networkDevices
The following table lists the metrics available for the Microsoft.ManagedNetworkFabric/networkDevices resource type.
Table headings
Metric - The metric display name as it appears in the Azure portal.
Name in Rest API - Metric name as referred to in the REST API.
Unit - Unit of measure.
Aggregation - The default aggregation type. Valid values: Average, Minimum, Maximum, Total, Count.
Dimensions - Dimensions available for the metric.
Time Grains - Intervals at which the metric is sampled. For example, PT1M indicates that the metric is sampled every minute, PT30M every 30 minutes, PT1H every hour, and so on.
DS Export- Whether the metric is exportable to Azure Monitor Logs via Diagnostic Settings.
For information on exporting metrics, see Create diagnostic settings in Azure Monitor.
For information on metric retention, see Azure Monitor Metrics overview.
For a list of supported logs, see Supported log categories - Microsoft.ManagedNetworkFabric/networkDevices
| Category | Metric | Name in REST API | Unit | Aggregation | Dimensions | Time Grains | DS Export |
|---|---|---|---|---|---|---|---|
| ACL State Counters | Acl Matched Packets Count of the number of packets matching the current ACL entry. |
AclMatchedPackets |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, AclSetName, AclEntrySequenceId, AclSetType |
PT1M | Yes |
| BGP Status | BGP Peer Status Operational state of the BGP peer. State is represented in numerical form. Idle : 1, Connect : 2, Active : 3, Opensent : 4, Openconfirm : 5, Established : 6 |
BgpPeerStatus |
Unspecified | Average, Minimum, Maximum, Total (Sum), Count | FabricId, IpAddress |
PT1M | Yes |
| Component Operational State | Component Operational State The current operational status of the component. |
ComponentOperStatus |
Unspecified | Average, Minimum, Maximum, Total (Sum), Count | FabricId, ComponentName |
PT1M | Yes |
| Resource Utilization | Cpu Utilization Avg Avg cpu utilization. The Avg value of the percentage measure of the statistic over the time interval. |
CpuUtilizationAvg |
Percent | Average, Minimum, Maximum, Total (Sum), Count | FabricId, ComponentName |
PT1M | Yes |
| Resource Utilization | Cpu Utilization Instant Instantaneous Cpu utilization. The instantaneous value of the percentage measure of the statistic over the time interval. |
CpuUtilizationInstant |
Percent | Average, Minimum, Maximum, Total (Sum), Count | FabricId, ComponentName |
PT1M | Yes |
| Resource Utilization | Cpu Utilization Max Max cpu utilization. The maximum value of the percentage measure of the statistic over the time interval. |
CpuUtilizationMax |
Percent | Average, Minimum, Maximum, Total (Sum), Count | FabricId, ComponentName |
PT1M | Yes |
| Resource Utilization | Cpu Utilization Min Min cpu utilization. The minimum value of the percentage measure of the statistic over the time interval. |
CpuUtilizationMin |
Percent | Average, Minimum, Maximum, Total (Sum), Count | FabricId, ComponentName |
PT1M | Yes |
| Resource Utilization | Fan Speed Current fan speed. |
FanSpeed |
Unspecified | Average, Minimum, Maximum, Total (Sum), Count | FabricId, ComponentName |
PT1M | Yes |
| Interface QoS State Counters | Interface Dropped Octets Number of octets dropped by the queue due to overrun, that is tail-drop or AMQ (RED, WRED, etc) induced drops as indicated by the attached queue-management-profile. |
IfDroppedOctets |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName, QueueName |
PT1M | Yes |
| Interface QoS State Counters | Interface Dropped Octets Rate The calculated drop rate of octets from the queue. |
IfDroppedOctetsRate |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName, QueueName |
PT1M | Yes |
| Interface QoS State Counters | Interface Dropped Pkts Number of packets dropped by the queue due to overrun, that is tail-drop or AMQ (RED, WRED, etc) induced drops as indicated by the attached queue-management-profile. |
IfDroppedPkts |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName, QueueName |
PT1M | Yes |
| Interface QoS State Counters | Interface Dropped Pkts Rate The calculated drop rate of packets from the queue. |
IfDroppedPktsRate |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName, QueueName |
PT1M | Yes |
| Interface State Counters | Eth Interface In CRC Errors The total number of frames received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error) |
IfEthInCrcErrors |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface State Counters | Eth Interface In Fragment Frames The total number of frames received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). |
IfEthInFragmentFrames |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface State Counters | Eth Interface In Jabber Frames Number of jabber frames received on the interface. Jabber frames are typically defined as oversize frames which also have a bad CRC. |
IfEthInJabberFrames |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface State Counters | Eth Interface In MAC Control Frames MAC layer control frames received on the interface |
IfEthInMacControlFrames |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface State Counters | Eth Interface In MAC Pause Frames MAC layer PAUSE frames received on the interface |
IfEthInMacPauseFrames |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface State Counters | Eth Interface In Maxsize Exceeded The total number frames received that are well-formed dropped due to exceeding the maximum frame size on the interface. |
IfEthInMaxsizeExceeded |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface State Counters | Eth Interface In Oversize Frames The total number of frames received that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed. |
IfEthInOversizeFrames |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface State Counters | Eth Interface Out MAC Control Frames MAC layer control frames sent on the interface. |
IfEthOutMacControlFrames |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface State Counters | Eth Interface Out MAC Pause Frames MAC layer PAUSE frames sent on the interface. |
IfEthOutMacPauseFrames |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface State Rate | Interface In Bits Rate The calculated received rate of the interface, measured in bits per second. |
IfInBitsRate |
BitsPerSecond | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface State Counters | Interface In Broadcast Pkts The number of packets, delivered by this sub-layer to a higher (sub-)layer, that were addressed to a broadcast address at this sub-layer. |
IfInBroadcastPkts |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface State Counters | Interface In Discards The number of inbound packets that were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. |
IfInDiscards |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface State Rate | Interface In Discards Rate The rate of inbound packets that were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. |
IfInDiscardsRate |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface State Counters | Interface In Errors For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. |
IfInErrors |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface State Counters | Interface In Errors Rate For packet-oriented interfaces, the rate of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. |
IfInErrorsRate |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface State Counters | Interface In FCS Errors Number of received packets which had errors in the frame check sequence (FCS), i.e., framing errors. |
IfInFcsErrors |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface State Counters | Interface In Multicast Pkts The number of packets, delivered by this sub-layer to a higher (sub-)layer, that were addressed to a multicast address at this sub-layer. For a MAC-layer protocol, this includes both Group and Functional addresses. |
IfInMulticastPkts |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface State Counters | Interface In Octets The total number of octets received on the interface, including framing characters. |
IfInOctets |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface State Counters | Interface In Pkts The total number of packets received on the interface, including all unicast, multicast, broadcast and bad packets etc. |
IfInPkts |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface State Rate | Interface In Pkts Rate The calculated received rate of the interface, measured in packets per second. |
IfInPktsRate |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface State Counters | Interface In Unicast Pkts The number of packets, delivered by this sub-layer to a higher (sub-)layer, that were not addressed to a multicast or broadcast address at this sub-layer. |
IfInUnicastPkts |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface State Rate | Interface Out Bits Rate The calculated transmitted rate of the interface, measured in bits per second. |
IfOutBitsRate |
BitsPerSecond | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface State Counters | Interface Out Broadcast Pkts The total number of packets that higher-level protocols requested be transmitted, and that were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent. |
IfOutBroadcastPkts |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface State Counters | Interface Out Discards The number of outbound packets that were chosen to be discarded even though no errors had been detected to prevent their being transmitted. |
IfOutDiscards |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface State Rate | Interface Out Discards Rate The rate of outbound packets that were chosen to be discarded even though no errors had been detected to prevent their being transmitted. |
IfOutDiscardsRate |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface State Counters | Interface Out Errors For packet-oriented interfaces, the number of outbound packets that could not be transmitted because of errors. |
IfOutErrors |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface State Counters | Interface Out Errors Rate For packet-oriented interfaces, the rate of outbound packets that could not be transmitted because of errors. |
IfOutErrorsRate |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface State Counters | Interface Out Multicast Pkts The total number of packets that higher-level protocols requested be transmitted, and that were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. For a MAC-layer protocol, this includes both Group and Functional addresses. |
IfOutMulticastPkts |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface State Counters | Interface Out Octets The total number of octets transmitted out of the interface, including framing characters. |
IfOutOctets |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface State Counters | Interface Out Pkts The total number of packets transmitted out of the interface, including all unicast, multicast, broadcast, and bad packets etc. |
IfOutPkts |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface State Rate | Interface Out Pkts Rate The calculated transmitted rate of the interface, measured in packets per second. |
IfOutPktsRate |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface State Counters | Interface Out Unicast Pkts The total number of packets that higher-level requested be transmitted, and that were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent. |
IfOutUnicastPkts |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface Operational State | Interface Operational State The current operational state of the interface. State is represented in numerical form. Up: 0, Down: 1, Lower_layer_down: 2, Testing: 3, Unknown: 4, Dormant: 5, Not_present: 6. |
InterfaceOperStatus |
Unspecified | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| LACP State Counters | Lacp Errors Number of LACPDU illegal packet errors. |
LacpErrors |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| LACP State Counters | Lacp In Pkts Number of LACPDUs received. |
LacpInPkts |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| LACP State Counters | Lacp Out Pkts Number of LACPDUs transmitted. |
LacpOutPkts |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| LACP State Counters | Lacp Rx Errors Number of LACPDU receive packet errors. |
LacpRxErrors |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| LACP State Counters | Lacp Tx Errors Number of LACPDU transmit packet errors. |
LacpTxErrors |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| LACP State Counters | Lacp Unknown Errors Number of LACPDU unknown packet errors. |
LacpUnknownErrors |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| LLDP State Counters | Lldp Frame In The number of lldp frames received. |
LldpFrameIn |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| LLDP State Counters | Lldp Frame Out The number of frames transmitted out. |
LldpFrameOut |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| LLDP State Counters | Lldp Tlv Unknown The number of frames received with unknown TLV. |
LldpTlvUnknown |
Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Resource Utilization | Memory Available The available memory physically installed, or logically allocated to the component. |
MemoryAvailable |
Bytes | Average, Minimum, Maximum, Total (Sum), Count | FabricId, ComponentName |
PT1M | Yes |
| Resource Utilization | Memory Free Memory that is not used and is available for allocation. |
MemoryFree |
Bytes | Average, Minimum, Maximum, Total (Sum), Count | FabricId, ComponentName |
PT1M | Yes |
| Resource Utilization | Memory Utilization Percentage The percentage of memory currently in use by processes running on the component, not considering reserved memory that is not available for use. |
MemoryUtilizationPercentage |
Percent | Average, Minimum, Maximum, Total (Sum), Count | FabricId, ComponentName |
PT1M | Yes |
| Resource Utilization | Memory Utilized The memory currently in use by processes running on the component, not considering reserved memory that is not available for use. |
MemoryUtilized |
Bytes | Average, Minimum, Maximum, Total (Sum), Count | FabricId, ComponentName |
PT1M | Yes |
| Resource Utilization | Power Supply Max Power Capacity Maximum power capacity of the power supply (watts). |
PowerSupplyCapacity |
Unspecified | Average, Minimum, Maximum, Total (Sum), Count | FabricId, ComponentName |
PT1M | Yes |
| Resource Utilization | Power Supply Input Current The input current draw of the power supply (amps). |
PowerSupplyInputCurrent |
Unspecified | Average, Minimum, Maximum, Total (Sum), Count | FabricId, ComponentName |
PT1M | Yes |
| Resource Utilization | Power Supply Input Voltage Input voltage to the power supply (volts). |
PowerSupplyInputVoltage |
Unspecified | Average, Minimum, Maximum, Total (Sum), Count | FabricId, ComponentName |
PT1M | Yes |
| Resource Utilization | Power Supply Output Current The output current supplied by the power supply (amps) |
PowerSupplyOutputCurrent |
Unspecified | Average, Minimum, Maximum, Total (Sum), Count | FabricId, ComponentName |
PT1M | Yes |
| Resource Utilization | Power Supply Output Power Output power supplied by the power supply (watts) |
PowerSupplyOutputPower |
Unspecified | Average, Minimum, Maximum, Total (Sum), Count | FabricId, ComponentName |
PT1M | Yes |
| Resource Utilization | Power Supply Output Voltage Output voltage supplied by the power supply (volts). |
PowerSupplyOutputVoltage |
Unspecified | Average, Minimum, Maximum, Total (Sum), Count | FabricId, ComponentName |
PT1M | Yes |
| Resource Utilization | Temperature Instantaneous The instantaneous value of temperature in degrees Celsius of the component. |
TemperatureInstant |
Unspecified | Average, Minimum, Maximum, Total (Sum), Count | FabricId, ComponentName |
PT1M | Yes |
| Resource Utilization | Temperature Max Max temperature in degrees Celsius of the component. The maximum value of the statistic over the sampling period. |
TemperatureMax |
Unspecified | Average, Minimum, Maximum, Total (Sum), Count | FabricId, ComponentName |
PT1M | Yes |
| Transceiver Status | Transceiver Supply Voltage The instantaneous value of supply voltage to the transceiver in volts. |
TransceiverSupplyVoltage |
Unspecified | Average, Minimum, Maximum, Total (Sum), Count | FabricId, ComponentName |
PT1M | Yes |