Azure Stack Hub public key infrastructure (PKI) certificate requirements

Azure Stack Hub has a public infrastructure network using externally accessible public IP addresses assigned to a small set of Azure Stack Hub services and possibly tenant VMs. PKI certificates with the appropriate DNS names for these Azure Stack Hub public infrastructure endpoints are required during Azure Stack Hub deployment. This article provides information about:

  • Certificate requirements for Azure Stack Hub.
  • Mandatory certificates required for Azure Stack Hub deployment.
  • Optional certificates required when deploying value-add resource providers.

Note

Azure Stack Hub by default also uses certificates issued from an internal Active Directory-integrated certificate authority (CA) for authentication between the nodes. To validate the certificate, all Azure Stack Hub infrastructure machines trust the root certificate of the internal CA by means of adding that certificate to their local certificate store. There's no pinning or filtering of certificates in Azure Stack Hub. The SAN of each server certificate is validated against the FQDN of the target. The entire chain of trust is also validated, along with the certificate expiration date (standard TLS server authentication without certificate pinning).

Certificate requirements

The following list describes the general certificate issuance, security, and formatting requirements:

  • Certificates must be issued from either an internal certificate authority or a public certificate authority. If a public certificate authority is used, it must be included in the base operating system image as part of the Microsoft Trusted Root Authority Program. For the full list, see List of Participants - Microsoft Trusted Root Program.
  • Your Azure Stack Hub infrastructure must have network access to the certificate authority's Certificate Revocation List (CRL) location published in the certificate. This CRL must be an http endpoint. Note: for disconnected deployments, certificates issued by a public certificate authority (CA) are not supported, if the CRL endpoint is not accessible. For more details see Features that are impaired or unavailable in disconnected deployments.
  • When rotating certificates in pre-1903 builds, certificates must be either issued from the same internal certificate authority used to sign certificates provided at deployment or any public certificate authority from above.
  • When rotating certificates for builds 1903 and later, certificates can be issued by any enterprise or public certificate authority.
  • The use of self-signed certificates aren't supported.
  • For deployment and rotation, you can either use a single certificate covering all name spaces in the certificate's Subject Name and Subject Alternative Name (SAN). Alternatively, you can use individual certificates for each of the namespaces below that the Azure Stack Hub services you plan to utilize require. Both approaches require using wild cards for endpoints where they're required, such as KeyVault and KeyVaultInternal.
  • The certificate signature algorithm shouldn't be SHA1.
  • The certificate format must be PFX, as both the public and private keys are required for Azure Stack Hub installation. The private key must have the local machine key attribute set.
  • The PFX encryption must be 3DES (this encryption is default when exporting from a Windows 10 client or Windows Server 2016 certificate store).
  • The certificate pfx files must have a value "Digital Signature" and "KeyEncipherment" in its "Key Usage" field.
  • The certificate pfx files must have the values "Server Authentication (1.3.6.1.5.5.7.3.1)" and "Client Authentication (1.3.6.1.5.5.7.3.2)" in the "Enhanced Key Usage" field.
  • The certificate's "Issued to:" field must not be the same as its "Issued by:" field.
  • The passwords to all certificate pfx files must be the same at the time of deployment.
  • Password to the certificate pfx has to be a complex password. Make note of this password because you'll use it as a deployment parameter. The password must meet the following password complexity requirements:
    • A minimum length of eight characters.
    • At least three of the following characters: uppercase letter, lowercase letter, numbers from 0-9, special characters, alphabetical character that's not uppercase or lowercase.
  • Ensure that the subject names and subject alternative names in the subject alternative name extension (x509v3_config) match. The subject alternative name field lets you specify additional host names (websites, IP addresses, common names) to be protected by a single SSL certificate.

Note

Self-signed certificates aren't supported.
When deploying Azure Stack Hub in disconnected mode it is recommended to use certificates issued by an enterprise certificate authority. This is important because clients accessing Azure Stack Hub endpoints must be able to contact the certificate revocation list (CRL).

Note

The presence of Intermediary Certificate Authorities in a certificate's chain-of-trusts is supported.

Mandatory certificates

The table in this section describes the Azure Stack Hub public endpoint PKI certificates that are required for both Microsoft Entra ID and AD FS Azure Stack Hub deployments. Certificate requirements are grouped by area, and the namespaces used and the certificates that are required for each namespace. The table also describes the folder in which your solution provider copies the different certificates per public endpoint.

Certificates with the appropriate DNS names for each Azure Stack Hub public infrastructure endpoint are required. Each endpoint's DNS name is expressed in the format: <prefix>.<region>.<fqdn>.

For your deployment, the <region> and <fqdn> values must match the region and external domain names that you chose for your Azure Stack Hub system. As an example, if the region is Redmond and the external domain name is contoso.com, the DNS names will have the format <prefix>.redmond.contoso.com. The <prefix> values are predesignated by Microsoft to describe the endpoint secured by the certificate. In addition, the <prefix> values of the external infrastructure endpoints depend on the Azure Stack Hub service that uses the specific endpoint.

For the production environments, we recommend individual certificates are generated for each endpoint and copied into the corresponding directory. For development environments, certificates can be provided as a single wildcard certificate covering all namespaces in the Subject and Subject Alternative Name (SAN) fields copied into all directories. A single certificate covering all endpoints and services is an insecure posture and hence development-only. Remember, both options require you to use wildcard certificates for endpoints like acs and Key Vault where they're required.

Note

During deployment, you must copy certificates to the deployment folder that matches the identity provider you're deploying against (Microsoft Entra ID or AD FS). If you use a single certificate for all endpoints, you must copy that certificate file into each deployment folder as outlined in the following tables. The folder structure is pre-built in the deployment virtual machine and can be found at: C:\CloudDeployment\Setup\Certificates.

Deployment folder Required certificate subject and subject alternative names (SAN) Scope (per region) Subdomain namespace
Public Portal portal.<region>.<fqdn> Portals <region>.<fqdn>
Admin Portal adminportal.<region>.<fqdn> Portals <region>.<fqdn>
Azure Resource Manager Public management.<region>.<fqdn> Azure Resource Manager <region>.<fqdn>
Azure Resource Manager Admin adminmanagement.<region>.<fqdn> Azure Resource Manager <region>.<fqdn>
ACSBlob *.blob.<region>.<fqdn>
(Wildcard SSL Certificate)
Blob Storage blob.<region>.<fqdn>
ACSTable *.table.<region>.<fqdn>
(Wildcard SSL Certificate)
Table Storage table.<region>.<fqdn>
ACSQueue *.queue.<region>.<fqdn>
(Wildcard SSL Certificate)
Queue Storage queue.<region>.<fqdn>
KeyVault *.vault.<region>.<fqdn>
(Wildcard SSL Certificate)
Key Vault vault.<region>.<fqdn>
KeyVaultInternal *.adminvault.<region>.<fqdn>
(Wildcard SSL Certificate)
Internal Keyvault adminvault.<region>.<fqdn>
Admin Extension Host *.adminhosting.<region>.<fqdn> (Wildcard SSL Certificates) Admin Extension Host adminhosting.<region>.<fqdn>
Public Extension Host *.hosting.<region>.<fqdn> (Wildcard SSL Certificates) Public Extension Host hosting.<region>.<fqdn>

If you deploy Azure Stack Hub using the Microsoft Entra deployment mode, you only need to request the certificates listed in previous table. But, if you deploy Azure Stack Hub using the AD FS deployment mode, you must also request the certificates described in the following table:

Deployment folder Required certificate subject and subject alternative names (SAN) Scope (per region) Subdomain namespace
ADFS adfs.<region>.<fqdn>
(SSL Certificate)
ADFS <region>.<fqdn>
Graph graph.<region>.<fqdn>
(SSL Certificate)
Graph <region>.<fqdn>

Important

All the certificates listed in this section must have the same password.

Optional PaaS certificates

If you're planning to deploy Azure Stack Hub PaaS services (such as SQL, MySQL, App Service, or Event Hubs) after Azure Stack Hub has been deployed and configured, you must request additional certificates to cover the endpoints of the PaaS services.

Important

The certificates that you use for resource providers must have the same root authority as those used for the global Azure Stack Hub endpoints.

The following table describes the endpoints and certificates required for resource providers. You don't need to copy these certificates to the Azure Stack Hub deployment folder. Instead, you provide these certificates during resource provider installation.

Scope (per region) Certificate Required certificate subject and Subject Alternative Names (SANs) Subdomain namespace
App Service Web Traffic Default SSL Cert *.appservice.<region>.<fqdn>
*.scm.appservice.<region>.<fqdn>
*.sso.appservice.<region>.<fqdn>
(Multi Domain Wildcard SSL Certificate1)
appservice.<region>.<fqdn>
scm.appservice.<region>.<fqdn>
App Service API api.appservice.<region>.<fqdn>
(SSL Certificate2)
appservice.<region>.<fqdn>
scm.appservice.<region>.<fqdn>
App Service FTP ftp.appservice.<region>.<fqdn>
(SSL Certificate2)
appservice.<region>.<fqdn>
scm.appservice.<region>.<fqdn>
App Service SSO sso.appservice.<region>.<fqdn>
(SSL Certificate2)
appservice.<region>.<fqdn>
scm.appservice.<region>.<fqdn>
Event Hubs SSL *.eventhub.<region>.<fqdn>
(Wildcard SSL Certificate)
eventhub.<region>.<fqdn>
SQL, MySQL SQL and MySQL *.dbadapter.<region>.<fqdn>
(Wildcard SSL Certificate)
dbadapter.<region>.<fqdn>

1 Requires one certificate with multiple wildcard subject alternative names. Multiple wildcard SANs on a single certificate might not be supported by all public certificate authorities.

2 A *.appservice.<region>.<fqdn> wildcard certificate can't be used in place of these three certificates (api.appservice.<region>.<fqdn>, ftp.appservice.<region>.<fqdn>, and sso.appservice.<region>.<fqdn>. Appservice explicitly requires the use of separate certificates for these endpoints.

Next steps

Learn how to generate PKI certificates for Azure Stack Hub deployment.