下载并提取 Azure Stack 开发工具包 (ASDK)Download and extract the Azure Stack Development Kit (ASDK)

在确保开发工具包主机满足安装 ASDK 的基本要求以后,下一步是下载并提取 ASDK 部署包,以获取 Cloudbuilder.vhdx。After ensuring that your development kit host computer meets the basic requirements for installing the ASDK, the next step is to download and extract the ASDK deployment package to get the Cloudbuilder.vhdx.

下载 ASDKDownload the ASDK

  1. 开始下载之前,请确保计算机满足以下先决条件:Before you start the download, make sure that your computer meets the following prerequisites:

    • 计算机必须有至少 60 GB 的可用磁盘空间,这些空间位于除操作系统磁盘外的四个独立且相同的逻辑硬盘驱动器上。The computer must have at least 60 GB of free disk space available on four separate, identical logical hard drives in addition to the operating system disk.
    • 必须已安装 .NET Framework 4.6(或更高版本).NET Framework 4.6 (or a later version) must be installed.
  2. 转到“入门”页,以便在其中下载 Azure Stack 开发工具包,提供自己的详细信息,然后单击“提交”。 Go to the Get Started page where you can download the Azure Stack Development Kit, provide your details, and then click Submit.

  3. 下载并运行先决条件检查器脚本:用于 Azure Stack 开发工具包的部署检查器Download and run the Deployment Checker for Azure Stack Development Kit prerequisite checker script. 此独立脚本完成由 Azure Stack 开发工具包的安装程序执行的先决条件检查。This standalone script goes through the pre-requisites checks done by the setup for Azure Stack Development Kit. 在下载更大的用于 Azure Stack 开发工具包的程序包之前,可以通过它来确认硬件和软件要求是否已得到满足。It provides a way to confirm you are meeting the hardware and software requirements, before downloading the larger package for Azure Stack Development Kit.

  4. 在“下载软件”下单击“Azure Stack 开发工具包”。 Under Download the software, click Azure Stack Development Kit.

    Note

    ASDK 下载项 (AzureStackDevelopmentKit.exe) 大约为 10GB。The ASDK download (AzureStackDevelopmentKit.exe) is approximately 10GB.

提取 ASDKExtract the ASDK

  1. 下载完成后,请单击“运行”, 启动 ASDK 自解压缩程序 (AzureStackDevelopmentKit.exe)。After the download completes, click Run to launch the ASDK self-extractor (AzureStackDevelopmentKit.exe).
  2. 查看并接受自解压缩程序向导的“许可协议”页中显示的许可协议,然后单击“下一步”。 Review and accept the displayed license agreement from the License Agreement page of the Self-Extractor Wizard and then click Next.
  3. 查看自解压缩程序向导的“重要说明”页上显示的隐私声明信息,然后单击“下一步”。 Review the privacy statement information displayed on the Important Notice page of the Self-Extractor Wizard and then click Next.
  4. 在自解压缩程序向导的“选择目标位置”页上选择要将 Azure Stack 安装程序文件提取到其中的位置,然后单击“下一步”。 Select the location for Azure Stack setup files to be extracted to on the Select Destination Location page of the Self-Extractor Wizard and then click Next. 默认位置为: 当前文件夹\Azure Stack Development Kit。The default location is current folder\Azure Stack Development Kit.
  5. 查看自解压缩程序向导的“准备提取”页上的目标位置摘要,然后单击“提取”以提取 CloudBuilder.vhdx(约 28GB)和 ThirdPartyLicenses.rtf 文件。 Review the destination location summary on the Ready to Extract page of the Self-Extractor Wizard, and then click Extract to extract the CloudBuilder.vhdx (approximately 28GB) and ThirdPartyLicenses.rtf files. 此过程需要一些时间才能完成。This process takes some time to complete.
  6. 将 CloudBuilder.vhdx 文件复制或移动到 ASDK 主机上的 C:\ 驱动器的根目录 (C:\CloudBuilder.vhdx)。Copy or move the CloudBuilder.vhdx file to the root of the C:\ drive (C:\CloudBuilder.vhdx) on the ASDK host computer.

Note

提取这些文件以后,即可通过删除 .EXE 和 .BIN 文件来恢复硬盘空间。After you extract the files, you can delete the .EXE and .BIN files to recover hard disk space. 也可备份这些文件,这样当你需要重新部署 ASDK 时,就不需再次下载这些文件。Or, you can back up these files so that you don't need to download the files again if you need to redeploy the ASDK.

后续步骤Next steps

准备 ASDK 主机Prepare the ASDK host computer