az network front-door probe

Manage Front Door health probe settings.

Commands

az network front-door probe create

Create Front Door health probe settings.

az network front-door probe delete

Delete Front Door health probe settings.

az network front-door probe list

List Front Door health probe settings.

az network front-door probe show

Get the details of a Front Door health probe settings.

az network front-door probe update

Update Front Door health probe settings.

az network front-door probe create

Create Front Door health probe settings.

az network front-door probe create --front-door-name
                                   --interval
                                   --name
                                   --path
                                   --resource-group
                                   [--enabled {Disabled, Enabled}]
                                   [--probeMethod {GET, HEAD}]
                                   [--protocol {Http, Https}]

Required Parameters

--front-door-name -f

Name of the Front Door.

--interval

Interval in seconds between probes.

--name -n

Name of the health probe.

--path

Path to probe.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Optional Parameters

--enabled

Enabled status.

accepted values: Disabled, Enabled
default value: Enabled
--probeMethod

Configures which HTTP method to use to probe the backends defined under backendPools.

accepted values: GET, HEAD
default value: HEAD
--protocol

Protocol to use for sending probes.

accepted values: Http, Https

az network front-door probe delete

Delete Front Door health probe settings.

az network front-door probe delete --front-door-name
                                   --name
                                   --resource-group

Required Parameters

--front-door-name -f

Name of the Front Door.

--name -n

Name of the health probe.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

az network front-door probe list

List Front Door health probe settings.

az network front-door probe list --front-door-name
                                 --resource-group

Required Parameters

--front-door-name -f

Name of the Front Door.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

az network front-door probe show

Get the details of a Front Door health probe settings.

az network front-door probe show --front-door-name
                                 --name
                                 --resource-group

Required Parameters

--front-door-name -f

Name of the Front Door.

--name -n

Name of the health probe.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

az network front-door probe update

Update Front Door health probe settings.

az network front-door probe update --front-door-name
                                   --name
                                   --resource-group
                                   [--enabled {Disabled, Enabled}]
                                   [--interval]
                                   [--path]
                                   [--probeMethod {GET, HEAD}]
                                   [--protocol {Http, Https}]

Required Parameters

--front-door-name -f

Name of the Front Door.

--name -n

Name of the health probe.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Optional Parameters

--enabled

Enabled status.

accepted values: Disabled, Enabled
--interval

Interval in seconds between probes.

--path

Path to probe.

--probeMethod

Configures which HTTP method to use to probe the backends defined under backendPools.

accepted values: GET, HEAD
--protocol

Protocol to use for sending probes.

accepted values: Http, Https