Deploy Istio-based service mesh add-on for Azure Kubernetes Service

This article shows you how to install the Istio-based service mesh add-on for Azure Kubernetes Service (AKS) cluster.

For more information on Istio and the service mesh add-on, see Istio-based service mesh add-on for Azure Kubernetes Service.

Before you begin

• The add-on requires Azure CLI version 2.57.0 or later installed. You can run az --version to verify version. To install or upgrade, see Install Azure CLI.

• To find information about which Istio add-on revisions are available in a region and their compatibility with AKS cluster versions, use the command az aks mesh get-revisions:

  az aks mesh get-revisions --location <location> -o table
  

• Note that if you choose to use any istioctl CLI commands, you will need to include a flag to point to the add-on installation of Istio: --istioNamespace aks-istio-system

Set environment variables

export CLUSTER=<cluster-name>
export RESOURCE_GROUP=<resource-group-name>
export LOCATION=<location>

Install Istio add-on

This section includes steps to install the Istio add-on during cluster creation or enable for an existing cluster using the Azure CLI. If you want to install the add-on using Bicep, see the guide for installing an AKS cluster with the Istio service mesh add-on using Bicep. To learn more about the Bicep resource definition for an AKS cluster, see Bicep managedCluster reference.

Revision selection

If you enable the add-on without specifying a revision, a default supported revision is installed for you.

To specify a revision, perform the following steps.

1. Use the az aks mesh get-revisions command to check which revisions are available for different AKS cluster versions in a region.
2. Based on the available revisions, you can include the --revision asm-X-Y (ex: --revision asm-1-20) flag in the enable command you use for mesh installation.

Install mesh during cluster creation

To install the Istio add-on when creating the cluster, use the --enable-azure-service-mesh or--enable-asm parameter.

az group create --name ${RESOURCE_GROUP} --location ${LOCATION}

az aks create \
    --resource-group ${RESOURCE_GROUP} \
    --name ${CLUSTER} \
    --enable-asm \
    --generate-ssh-keys    

Install mesh for existing cluster

The following example enables Istio add-on for an existing AKS cluster:

az aks mesh enable --resource-group ${RESOURCE_GROUP} --name ${CLUSTER}

Verify successful installation

To verify the Istio add-on is installed on your cluster, run the following command:

az aks show --resource-group ${RESOURCE_GROUP} --name ${CLUSTER}  --query 'serviceMeshProfile.mode'

Confirm the output shows Istio.

Use az aks get-credentials to the credentials for your AKS cluster:

az aks get-credentials --resource-group ${RESOURCE_GROUP} --name ${CLUSTER}

Use kubectl to verify that istiod (Istio control plane) pods are running successfully:

kubectl get pods -n aks-istio-system

Confirm the istiod pod has a status of Running. For example:

NAME                               READY   STATUS    RESTARTS   AGE
istiod-asm-1-18-74f7f7c46c-xfdtl   1/1     Running   0          2m
istiod-asm-1-18-74f7f7c46c-4nt2v   1/1     Running   0          2m

Enable sidecar injection

To automatically install sidecar to any new pods, you need to annotate your namespaces with the revision label corresponding to the control plane revision currently installed.

If you're unsure which revision is installed, use:

az aks show --resource-group ${RESOURCE_GROUP} --name ${CLUSTER}  --query 'serviceMeshProfile.istio.revisions'

Apply the revision label:

kubectl label namespace default istio.io/rev=asm-X-Y

For manual injection of sidecar using istioctl kube-inject, you need to specify extra parameters for istioNamespace (-i) and revision (-r). For example:

kubectl apply -f <(istioctl kube-inject -f sample.yaml -i aks-istio-system -r asm-X-Y) -n foo

Trigger sidecar injection

You can either deploy the sample application provided for testing, or trigger sidecar injection for existing workloads.

Existing applications

If you have existing applications to be added to the mesh, ensure their namespaces are labeled as in the previous step, and then restart their deployments to trigger sidecar injection:

kubectl rollout restart -n <namespace> <deployment name>

Verify that sidecar injection succeeded by ensuring all containers are ready and looking for the istio-proxy container in the kubectl describe output, for example:

kubectl describe pod -n namespace <pod name>

The istio-proxy container is the Envoy sidecar. Your application is now part of the data plane.

Deploy sample application

Use kubectl apply to deploy the sample application on the cluster:

kubectl apply -f https://raw.githubusercontent.com/istio/istio/release-1.18/samples/bookinfo/platform/kube/bookinfo.yaml

Confirm several deployments and services are created on your cluster. For example:

service/details created
serviceaccount/bookinfo-details created
deployment.apps/details-v1 created
service/ratings created
serviceaccount/bookinfo-ratings created
deployment.apps/ratings-v1 created
service/reviews created
serviceaccount/bookinfo-reviews created
deployment.apps/reviews-v1 created
deployment.apps/reviews-v2 created
deployment.apps/reviews-v3 created
service/productpage created
serviceaccount/bookinfo-productpage created
deployment.apps/productpage-v1 created

Use kubectl get services to verify that the services were created successfully:

kubectl get services

Confirm the following services were deployed:

NAME          TYPE        CLUSTER-IP     EXTERNAL-IP   PORT(S)    AGE
details       ClusterIP   10.0.180.193   <none>        9080/TCP   87s
kubernetes    ClusterIP   10.0.0.1       <none>        443/TCP    15m
productpage   ClusterIP   10.0.112.238   <none>        9080/TCP   86s
ratings       ClusterIP   10.0.15.201    <none>        9080/TCP   86s
reviews       ClusterIP   10.0.73.95     <none>        9080/TCP   86s

kubectl get pods

NAME                              READY   STATUS    RESTARTS   AGE
details-v1-558b8b4b76-2llld       2/2     Running   0          2m41s
productpage-v1-6987489c74-lpkgl   2/2     Running   0          2m40s
ratings-v1-7dc98c7588-vzftc       2/2     Running   0          2m41s
reviews-v1-7f99cc4496-gdxfn       2/2     Running   0          2m41s
reviews-v2-7d79d5bd5d-8zzqd       2/2     Running   0          2m41s
reviews-v3-7dbcdcbc56-m8dph       2/2     Running   0          2m41s

Confirm that all the pods have status of Running with two containers in the READY column. The second container (istio-proxy) added to each pod is the Envoy sidecar injected by Istio, and the other is the application container.

To test this sample application against ingress, check out next-steps.

Delete resources

Use kubectl delete to delete the sample application:

kubectl delete -f https://raw.githubusercontent.com/istio/istio/release-1.18/samples/bookinfo/platform/kube/bookinfo.yaml

If you don't intend to enable Istio ingress on your cluster and want to disable the Istio add-on, run the following command:

az aks mesh disable --resource-group ${RESOURCE_GROUP} --name ${CLUSTER}

Istio CustomResourceDefintions (CRDs) aren't be deleted by default. To clean them up, use:

kubectl delete crd $(kubectl get crd -A | grep "istio.io" | awk '{print $1}')

Use az group delete to delete your cluster and the associated resources:

az group delete --name ${RESOURCE_GROUP} --yes --no-wait

Next steps

• Deploy external or internal ingresses for Istio service mesh add-on
• Scale istiod and ingress gateway HPA