Move Azure internal Load Balancer to another region using the Azure portal
There are various scenarios in which you'd want to move your existing internal load balancer from one region to another. For example, you may want to create an internal load balancer with the same configuration for testing. You may also want to move an internal load balancer to another region as part of disaster recovery planning.
Azure internal load balancers can't be moved from one region to another. You can however, use an Azure Resource Manager template to export the existing configuration and virtual network of an internal load balancer. You can then stage the resource in another region by exporting the load balancer and virtual network to a template, modifying the parameters to match the destination region, and then deploy the templates to the new region. For more information on Resource Manager and templates, see Quickstart: Create and deploy Azure Resource Manager templates by using the Azure portal.
Prerequisites
Make sure that the Azure internal load balancer is in the Azure region from which you want to move.
Azure internal load balancers can't be moved between regions. You have to associate the new load balancer to resources in the target region.
To export an internal load balancer configuration and deploy a template to create an internal load balancer in another region, you need the Network Contributor role or higher.
Identify the source networking layout and all the resources that you're currently using. This layout includes but isn't limited to load balancers, network security groups, virtual machines, and virtual networks.
Verify that your Azure subscription allows you to create internal load balancers in the target region that's used. Contact support to enable the required quota.
Make sure that your subscription has enough resources to support the addition of load balancers for this process. See Azure subscription and service limits, quotas, and constraints
Prepare and move
The following steps show how to prepare the internal load balancer for the move using a Resource Manager template, and move the internal load balancer configuration to the target region using the Azure portal. As part of this process, the virtual network configuration of the internal load balancer must be included and must be done first before moving the internal load balancer.
Note
We recommend that you use the Azure Az PowerShell module to interact with Azure. See Install Azure PowerShell to get started. To learn how to migrate to the Az PowerShell module, see Migrate Azure PowerShell from AzureRM to Az.
Export the virtual network template and deploy from the Azure portal
Sign in to the Azure portal > Resource Groups.
Locate the Resource Group that contains the source virtual network and select it.
Select > Settings > Export template.
Choose Deploy under Export template.
Select TEMPLATE > Edit parameters to open the parameters.json file in the online editor.
To edit the parameter of the virtual network name, change the value property under parameters:
{ "$schema": "https://schema.management.azure.com/schemas/2015-01-01/deploymentParameters.json#", "contentVersion": "1.0.0.0", "parameters": { "virtualNetworks_myVNET1_name": { "value": "<target-virtual-network-name>" } } }Change the source virtual network name value in the editor to a name of your choice for the target VNET. Ensure you enclose the name in quotes.
Select Save in the editor.
Select TEMPLATE > Edit template to open the template.json file in the online editor.
To edit the target region where the VNET will be moved, change the location property under resources:
"resources": [ { "type": "Microsoft.Network/virtualNetworks", "apiVersion": "2019-06-01", "name": "[parameters('virtualNetworks_myVNET1_name')]", "location": "<target-region>", "properties": { "provisioningState": "Succeeded", "resourceGuid": "6e2652be-35ac-4e68-8c70-621b9ec87dcb", "addressSpace": { "addressPrefixes": [ "10.0.0.0/16" ] },To obtain region location codes, see Azure Locations. The code for a region is the region name with no spaces, China North = chinaeast.
You can also change other parameters in the template.json file if you choose, and are optional depending on your requirements:
Address Space - The address space of the VNET can be altered before saving by modifying the resources > addressSpace section and changing the addressPrefixes property in the template.json file:
"resources": [ { "type": "Microsoft.Network/virtualNetworks", "apiVersion": "2019-06-01", "name": "[parameters('virtualNetworks_myVNET1_name')]", "location": "<target-region", "properties": { "provisioningState": "Succeeded", "resourceGuid": "6e2652be-35ac-4e68-8c70-621b9ec87dcb", "addressSpace": { "addressPrefixes": [ "10.0.0.0/16" ] },Subnet - The subnet name and the subnet address space can be changed or added to by modifying the subnets section of the template.json file. The name of the subnet can be changed by altering the name property. The subnet address space can be changed by altering the addressPrefix property in the template.json file:
"subnets": [ { "name": "subnet-1", "etag": "W/\"d9f6e6d6-2c15-4f7c-b01f-bed40f748dea\"", "properties": { "provisioningState": "Succeeded", "addressPrefix": "10.0.0.0/24", "delegations": [], "privateEndpointNetworkPolicies": "Enabled", "privateLinkServiceNetworkPolicies": "Enabled" } }, { "name": "GatewaySubnet", "etag": "W/\"d9f6e6d6-2c15-4f7c-b01f-bed40f748dea\"", "properties": { "provisioningState": "Succeeded", "addressPrefix": "10.0.1.0/29", "serviceEndpoints": [], "delegations": [], "privateEndpointNetworkPolicies": "Enabled", "privateLinkServiceNetworkPolicies": "Enabled" } } ]In the template.json file, to change the address prefix, it must be edited in two places, the section listed above and the type section listed below. Change the addressPrefix property to match the one above:
"type": "Microsoft.Network/virtualNetworks/subnets", "apiVersion": "2019-06-01", "name": "[concat(parameters('virtualNetworks_myVNET1_name'), '/GatewaySubnet')]", "dependsOn": [ "[resourceId('Microsoft.Network/virtualNetworks', parameters('virtualNetworks_myVNET1_name'))]" ], "properties": { "provisioningState": "Succeeded", "addressPrefix": "10.0.1.0/29", "serviceEndpoints": [], "delegations": [], "privateEndpointNetworkPolicies": "Enabled", "privateLinkServiceNetworkPolicies": "Enabled" } }, { "type": "Microsoft.Network/virtualNetworks/subnets", "apiVersion": "2019-06-01", "name": "[concat(parameters('virtualNetworks_myVNET1_name'), '/subnet-1')]", "dependsOn": [ "[resourceId('Microsoft.Network/virtualNetworks', parameters('virtualNetworks_myVNET1_name'))]" ], "properties": { "provisioningState": "Succeeded", "addressPrefix": "10.0.0.0/24", "delegations": [], "privateEndpointNetworkPolicies": "Enabled", "privateLinkServiceNetworkPolicies": "Enabled" } } ]
Select Save in the online editor.
Select BASICS > Subscription to choose the subscription where the target VNET will be deployed.
Select BASICS > Resource group to choose the resource group where the target VNET will be deployed. You can select Create new to create a new resource group for the target VNET. Ensure the name isn't the same as the source resource group of the existing VNET.
Verify BASICS > Location is set to the target location where you wish for the VNET to be deployed.
Verify under SETTINGS that the name matches the name that you entered in the parameters editor above.
Check the box under TERMS AND CONDITIONS.
Select the Purchase button to deploy the target virtual network.
Export the internal load balancer template and deploy from Azure PowerShell
Select to the Azure portal > Resource Groups.
Locate the Resource Group that contains the source internal load balancer and select it.
Select > Settings > Export template.
Choose Deploy under Export template.
Select TEMPLATE > Edit parameters to open the parameters.json file in the online editor.
To edit the parameter of the internal load balancer name, change the property defaultValue of the source internal load balancer name to the name of your target internal load balancer, ensure the name is in quotes:
"$schema": "https://schema.management.azure.com/schemas/2015-01-01/deploymentTemplate.json#", "contentVersion": "1.0.0.0", "parameters": { "loadBalancers_myLoadBalancer_name": { "defaultValue": "<target-internal-lb-name>", "type": "String" }, "virtualNetworks_myVNET2_internalid": { "defaultValue": "<target-vnet-resource-ID>", "type": "String" }To edit value of the target virtual network that was moved above, you must first obtain the resource ID and then copy and paste it into the parameters.json file. To obtain the ID:
Select to the Azure portal > Resource Groups in another browser tab or window.
Locate the target resource group that contains the moved virtual network from the steps above, and select it.
Select > Settings > Properties.
On the right side of the portal, highlight the Resource ID and copy it to the clipboard. Alternatively, you can select the copy to clipboard button to the right of the Resource ID path.
Paste the resource ID into the defaultValue property into the Edit Parameters editor open in the other browser window or tab:
"$schema": "https://schema.management.azure.com/schemas/2015-01-01/deploymentTemplate.json#", "contentVersion": "1.0.0.0", "parameters": { "loadBalancers_myLoadBalancer_name": { "defaultValue": "<target-internal-lb-name>", "type": "String" }, "virtualNetworks_myVNET2_internalid": { "defaultValue": "<target-vnet-resource-ID>", "type": "String" }Select Save in the online editor.
Select TEMPLATE > Edit template to open the template.json file in the online editor.
To edit the target region where the internal load balancer configuration will be moved, change the location property under resources in the template.json file:
"resources": [ { "type": "Microsoft.Network/loadBalancers", "apiVersion": "2019-06-01", "name": "[parameters('loadBalancers_myLoadBalancer_name')]", "location": "<target-internal-lb-region>", "sku": { "name": "Standard", "tier": "Regional" },To obtain region location codes, see Azure Locations. The code for a region is the region name with no spaces, China North = chinaeast.
You can also change other parameters in the template if you choose, and are optional depending on your requirements:
Sku - You can change the sku of the internal load balancer in the configuration from standard to basic or basic to standard by altering the sku > name property in the template.json file:
"resources": [ { "type": "Microsoft.Network/loadBalancers", "apiVersion": "2019-06-01", "name": "[parameters('loadBalancers_myLoadBalancer_name')]", "location": "<target-internal-lb-region>", "sku": { "name": "Standard", "tier": "Regional" },For more information on the differences between basic and standard sku load balancers, see Azure Standard Load Balancer overview
Availability zone - You can change the zone(s) of the load balancer's frontend by changing the zone property. If the zone property isn't specified, the frontend is created as no-zone. You can specify a single zone to create a zonal frontend or all 3 zones for a zone-redundant frontend.
"frontendIPConfigurations": [ { "name": "myfrontendIPinbound", "etag": "W/\"39e5e9cd-2d6d-491f-83cf-b37a259d86b6\"", "type": "Microsoft.Network/loadBalancers/frontendIPConfigurations", "properties": { "provisioningState": "Succeeded", "privateIPAddress": "10.0.0.6", "privateIPAllocationMethod": "Dynamic", "subnet": { "id": "[concat(parameters('virtualNetworks_myVNET2_internalid'), '/subnet-1')]" }, "loadBalancingRules": [ { "id": "[concat(resourceId('Microsoft.Network/loadBalancers', parameters('loadBalancers_myLoadBalancer_name')), '/loadBalancingRules/myInboundRule')]" } ], "privateIPAddressVersion": "IPv4" }, "zones": [ "1", "2", "3" ] },For more about availability zones, see Regions and availability zones in Azure.
Load balancing rules - You can add or remove load balancing rules in the configuration by adding or removing entries to the loadBalancingRules section of the template.json file:
"loadBalancingRules": [ { "name": "myInboundRule", "etag": "W/\"39e5e9cd-2d6d-491f-83cf-b37a259d86b6\"", "properties": { "provisioningState": "Succeeded", "frontendIPConfiguration": { "id": "[concat(resourceId('Microsoft.Network/loadBalancers', parameters('loadBalancers_myLoadBalancer_name')), '/frontendIPConfigurations/myfrontendIPinbound')]" }, "frontendPort": 80, "backendPort": 80, "enableFloatingIP": false, "idleTimeoutInMinutes": 4, "protocol": "Tcp", "enableTcpReset": false, "loadDistribution": "Default", "disableOutboundSnat": true, "backendAddressPool": { "id": "[concat(resourceId('Microsoft.Network/loadBalancers', parameters('loadBalancers_myLoadBalancer_name')), '/backendAddressPools/myBEPoolInbound')]" }, "probe": { "id": "[concat(resourceId('Microsoft.Network/loadBalancers', parameters('loadBalancers_myLoadBalancer_name')), '/probes/myHTTPProbe')]" } } } ]For more information on load balancing rules, see What is Azure Load Balancer?
Probes - You can add or remove a probe for the load balancer in the configuration by adding or removing entries to the probes section of the template.json file:
"probes": [ { "name": "myHTTPProbe", "etag": "W/\"39e5e9cd-2d6d-491f-83cf-b37a259d86b6\"", "properties": { "provisioningState": "Succeeded", "protocol": "Http", "port": 80, "requestPath": "/", "intervalInSeconds": 15, "numberOfProbes": 2 } } ],For more information on Azure Load Balancer health probes, see Load Balancer health probes
Inbound NAT rules - You can add or remove inbound NAT rules for the load balancer by adding or removing entries to the inboundNatRules section of the template.json file:
"inboundNatRules": [ { "name": "myInboundNATRule", "etag": "W/\"39e5e9cd-2d6d-491f-83cf-b37a259d86b6\"", "properties": { "provisioningState": "Succeeded", "frontendIPConfiguration": { "id": "[concat(resourceId('Microsoft.Network/loadBalancers', parameters('loadBalancers_myLoadBalancer_name')), '/frontendIPConfigurations/myfrontendIPinbound')]" }, "frontendPort": 4422, "backendPort": 3389, "enableFloatingIP": false, "idleTimeoutInMinutes": 4, "protocol": "Tcp", "enableTcpReset": false } } ]To complete the addition or removal of an inbound NAT rule, the rule must be present or removed as a type property at the end of the template.json file:
{ "type": "Microsoft.Network/loadBalancers/inboundNatRules", "apiVersion": "2019-06-01", "name": "[concat(parameters('loadBalancers_myLoadBalancer_name'), '/myInboundNATRule')]", "dependsOn": [ "[resourceId('Microsoft.Network/loadBalancers', parameters('loadBalancers_myLoadBalancer_name'))]" ], "properties": { "provisioningState": "Succeeded", "frontendIPConfiguration": { "id": "[concat(resourceId('Microsoft.Network/loadBalancers', parameters('loadBalancers_myLoadBalancer_name')), '/frontendIPConfigurations/myfrontendIPinbound')]" }, "frontendPort": 4422, "backendPort": 3389, "enableFloatingIP": false, "idleTimeoutInMinutes": 4, "protocol": "Tcp", "enableTcpReset": false } }For more information on inbound NAT rules, see What is Azure Load Balancer?
Select Save in the online editor.
Select BASICS > Subscription to choose the subscription where the target internal load balancer will be deployed.
Select BASICS > Resource group to choose the resource group where the target load balancer will be deployed. You can select Create new to create a new resource group for the target internal load balancer or choose the existing resource group that was created above for the virtual network. Ensure the name isn't the same as the source resource group of the existing source internal load balancer.
Verify BASICS > Location is set to the target location where you wish for the internal load balancer to be deployed.
Verify under SETTINGS that the name matches the name that you entered in the parameters editor above. Verify the resource IDs are populated for any virtual networks in the configuration.
Check the box under TERMS AND CONDITIONS.
Select the Purchase button to deploy the target virtual network.
Discard
If you wish to discard the target virtual network and internal load balancer, delete the resource group that contains the target virtual network and internal load balancer. To do so, select the resource group from your dashboard in the portal and select Delete at the top of the overview page.
Clean up
To commit the changes and complete the move of the virtual network and internal load balancer, delete the source virtual network and internal load balancer or resource group. To do so, select the virtual network and internal load balancer or resource group from your dashboard in the portal and select Delete at the top of each page.
Next steps
In this tutorial, you moved an Azure internal load balancer from one region to another and cleaned up the source resources. To learn more about moving resources between regions and disaster recovery in Azure, refer to: