Create a VM from a specialized disk by using PowerShell

Create a snapshot and then create a disk from the snapshot. This strategy allows you to keep the original VHD as a fallback:

1. Open the Azure portal.
2. In the search box, enter disks and then select Disks to display the list of available disks.
3. Select the disk that you would like to use. The Disk page for that disk appears.
4. From the menu at the top, select Create snapshot.
5. Choose a Resource group for the snapshot. You can use either an existing resource group or create a new one.
6. Enter a Name for the snapshot.
7. For Snapshot type, choose Full.
8. For Storage type, choose Standard HDD, Premium SSD, or Zone-redundant storage.
9. When you're done, select Review + create to create the snapshot.
10. After the snapshot has been created, select Home > Create a resource.
11. In the search box, enter managed disk and then select Managed Disks from the list.
12. On the Managed Disks page, select Create.
13. Choose a Resource group for the disk. You can use either an existing resource group or create a new one. This selection will also be used as the resource group where you create the VM from the disk.
14. For Region, you must select the same region where the snapshot is located.
15. Enter a Name for the disk.
16. In Source type, ensure Snapshot is selected.
17. In the Source snapshot drop-down, select the snapshot you want to use.
18. For Size, you can change the storage type and size as needed.
19. Make any other adjustments as needed and then select Review + create to create the disk. Once validation passes, select Create.

After you have the disk that you want to use, you can create the VM in the portal:

1. In the search box, enter disks and then select Disks to display the list of available disks.
2. Select the disk that you would like to use. The Disk page for that disk opens.
3. In the Essentials section, ensure that Disk state is listed as Unattached. If it isn't, you might need to either detach the disk from the VM or delete the VM to free up the disk.
4. In the menu at the top of the page, select Create VM.
5. On the Basics page for the new VM, enter a Virtual machine name and either select an existing Resource group or create a new one.
6. For Size, select Change size to access the Size page.
7. The disk name should be pre-filled in the Image section.
8. On the Disks page, you may notice that the OS Disk Type cannot be changed. This preselected value is configured at the point of Snapshot or VHD creation and will carry over to the new VM. If you need to modify disk type take a new snapshot from an existing VM or disk.
9. On the Networking page, you can either let the portal create all new resources or you can select an existing Virtual network and Network security group. The portal always creates a new network interface and public IP address for the new VM.
10. On the Management page, make any changes to the monitoring options.
11. When you're done, select Review + create.
12. If the VM configuration passes validation, select Create to start the deployment.

If you had a VM that you deleted and you want to reuse the OS disk to create a new VM, use Get-AzDisk.

$resourceGroupName = 'myResourceGroup'
$osDiskName = 'myOsDisk'
$osDisk = Get-AzDisk `
-ResourceGroupName $resourceGroupName `
-DiskName $osDiskName

You can now attach this disk as the OS disk to a new VM.

Create the virtual network and subnet for the VM.

1. Create the subnet. This example creates a subnet named mySubNet, in the resource group myDestinationResourceGroup, and sets the subnet address prefix to 10.0.0.0/24.

   $subnetName = 'mySubNet'
   $singleSubnet = New-AzVirtualNetworkSubnetConfig `
      -Name $subnetName `
      -AddressPrefix 10.0.0.0/24
   

2. Create the virtual network. This example sets the virtual network name to myVnetName, the location to China North, and the address prefix for the virtual network to 10.0.0.0/16.

   $vnetName = "myVnetName"
   $vnet = New-AzVirtualNetwork `
      -Name $vnetName -ResourceGroupName $destinationResourceGroup `
      -Location $location `
      -AddressPrefix 10.0.0.0/16 `
      -Subnet $singleSubnet
   

To be able to sign in to your VM with remote desktop protocol (RDP), you'll need to have a security rule that allows RDP access on port 3389. In our example, the VHD for the new VM was created from an existing Windows specialized VM, so you can use an account that existed on the source virtual machine for RDP. This example denies RDP traffic, to be more secure. You can change -Access to Allow if you want to allow RDP access.

This example sets the network security group (NSG) name to myNsg and the RDP rule name to myRdpRule.

$nsgName = "myNsg"

$rdpRule = New-AzNetworkSecurityRuleConfig -Name myRdpRule -Description "Deny RDP" `
    -Access Deny -Protocol Tcp -Direction Inbound -Priority 110 `
    -SourceAddressPrefix Internet -SourcePortRange * `
    -DestinationAddressPrefix * -DestinationPortRange 3389
$nsg = New-AzNetworkSecurityGroup `
   -ResourceGroupName $destinationResourceGroup `
   -Location $location `
   -Name $nsgName -SecurityRules $rdpRule
	

For more information about endpoints and NSG rules, see Filter network traffic with a network security group.

To enable communication with the virtual machine in the virtual network, you'll need a public IP address and a network interface.

1. Create the public IP. In this example, the public IP address name is set to myIP.

   $ipName = "myIP"
   $pip = New-AzPublicIpAddress `
      -Name $ipName -ResourceGroupName $destinationResourceGroup `
      -Location $location `
      -AllocationMethod Dynamic
   

2. Create the NIC. In this example, the NIC name is set to myNicName.

   $nicName = "myNicName"
   $nic = New-AzNetworkInterface -Name $nicName `
      -ResourceGroupName $destinationResourceGroup `
      -Location $location -SubnetId $vnet.Subnets[0].Id `
      -PublicIpAddressId $pip.Id `
      -NetworkSecurityGroupId $nsg.Id
   

Set the VM name and size. This example sets the VM name to myVM and the VM size to Standard_A2.

$vmName = "myVM"
$vmConfig = New-AzVMConfig -VMName $vmName -VMSize "Standard_A2"

Add the NIC.

$vm = Add-AzVMNetworkInterface -VM $vmConfig -Id $nic.Id

Add the OS disk. Add the OS disk to the configuration by using Set-AzVMOSDisk. This example sets the size of the disk to 128 GB and attaches the disk as a Windows OS disk.

$vm = Set-AzVMOSDisk -VM $vm -ManagedDiskId $osDisk.Id -StorageAccountType Standard_LRS `
    -DiskSizeInGB 128 -CreateOption Attach -Windows

Create the VM by using New-AzVM with the configurations that we just created.

New-AzVM -ResourceGroupName $destinationResourceGroup -Location $location -VM $vm

If this command is successful, you'll see output like this:

RequestId IsSuccessStatusCode StatusCode ReasonPhrase
--------- ------------------- ---------- ------------
                         True         OK OK   

You should see the newly created VM either in the Azure portal under Browse > Virtual machines, or by using the following PowerShell commands.

$vmList = Get-AzVM -ResourceGroupName $destinationResourceGroup
$vmList.Name