Quickstart: Use the Copy Data tool in the Azure Data Factory Studio to copy data

APPLIES TO: Azure Data Factory

In this quickstart, you use the Azure portal to create a data factory. Then, you use the Copy Data tool to create a pipeline that copies data from a folder in Azure Blob storage to another folder.


If you are new to Azure Data Factory, see Introduction to Azure Data Factory before doing this quickstart.


Azure subscription

If you don't have an Azure subscription, create a Trial Subscription before you begin.

Azure roles

To create Data Factory instances, the user account that you use to sign in to Azure must be a member of the contributor or owner role, or an administrator of the Azure subscription. To view the permissions that you have in the subscription, go to the Azure portal, select your username in the upper-right corner, select "..." icon for more options, and then select My permissions. If you have access to multiple subscriptions, select the appropriate subscription.

To create and manage child resources for Data Factory - including datasets, linked services, pipelines, triggers, and integration runtimes - the following requirements are applicable:

  • To create and manage child resources in the Azure portal, you must belong to the Data Factory Contributor role at the resource group level or above.
  • To create and manage child resources with PowerShell or the SDK, the contributor role at the resource level or above is sufficient.

For sample instructions about how to add a user to a role, see the Add roles article.

For more info, see the following articles:

Azure Storage account

You use a general-purpose Azure Storage account (specifically Blob storage) as both source and destination data stores in this quickstart. If you don't have a general-purpose Azure Storage account, see Create a storage account to create one.

Get the storage account name

You need the name of your Azure Storage account for this quickstart. The following procedure provides steps to get the name of your storage account:

  1. In a web browser, go to the Azure portal and sign in using your Azure username and password.
  2. From the Azure portal menu, select All services, then select Storage > Storage accounts. You can also search for and select Storage accounts from any page.
  3. In the Storage accounts page, filter for your storage account (if needed), and then select your storage account.

You can also search for and select Storage accounts from any page.

Create a blob container

In this section, you create a blob container named adftutorial in Azure Blob storage.

  1. From the storage account page, select Overview > Containers.

  2. On the <Account name> - Containers page's toolbar, select Container.

  3. In the New container dialog box, enter adftutorial for the name, and then select OK. The <Account name> - Containers page is updated to include adftutorial in the list of containers.

    List of containers

Add an input folder and file for the blob container

In this section, you create a folder named input in the container you created, and then upload a sample file to the input folder. Before you begin, open a text editor such as Notepad, and create a file named emp.txt with the following content:

John, Doe
Jane, Doe

Save the file in the C:\ADFv2QuickStartPSH folder. (If the folder doesn't already exist, create it.) Then return to the Azure portal and follow these steps:

  1. In the <Account name> - Containers page where you left off, select adftutorial from the updated list of containers.

    1. If you closed the window or went to another page, sign in to the Azure portal again.
    2. From the Azure portal menu, select All services, then select Storage > Storage accounts. You can also search for and select Storage accounts from any page.
    3. Select your storage account, and then select Containers > adftutorial.
  2. On the adftutorial container page's toolbar, select Upload.

  3. In the Upload blob page, select the Files box, and then browse to and select the emp.txt file.

  4. Expand the Advanced heading. The page now displays as shown:

    Select Advanced link

  5. In the Upload to folder box, enter input.

  6. Select the Upload button. You should see the emp.txt file and the status of the upload in the list.

  7. Select the Close icon (an X) to close the Upload blob page.

Keep the adftutorial container page open. You use it to verify the output at the end of this quickstart.

Create a data factory

  1. Launch Microsoft Edge or Google Chrome web browser. Currently, Data Factory UI is supported only in Microsoft Edge and Google Chrome web browsers.

  2. Go to the Azure portal.

  3. From the Azure portal menu, select Create a resource > Analytics > Data Factory:

    New data factory creation

  4. On the New data factory page, enter ADFTutorialDataFactory for Name.

    The name of the Azure Data Factory must be globally unique. If you see the following error, change the name of the data factory (for example, <yourname>ADFTutorialDataFactory) and try creating again. For naming rules for Data Factory artifacts, see the Data Factory - naming rules article.

    Error when a name is not available

  5. For Subscription, select your Azure subscription in which you want to create the data factory.

  6. For Resource Group, use one of the following steps:

    • Select Use existing, and select an existing resource group from the list.
    • Select Create new, and enter the name of a resource group.

    To learn about resource groups, see Using resource groups to manage your Azure resources.

  7. For Location, select the location for the data factory.

    The list shows only locations that Data Factory supports, and where your Azure Data Factory meta data will be stored. The associated data stores (like Azure Storage and Azure SQL Database) and computes (like Azure HDInsight) that Data Factory uses can run in other regions.

  8. Select Create.

  9. After the creation is complete, you see the Data Factory page. Select Open on the Open Azure Data Factory Studio tile to start the Azure Data Factory user interface (UI) application on a separate tab.

    Home page for the Azure Data Factory, with the Open Azure Data Factory Studio tile.

Start the Copy Data tool

  1. On the home page of Azure Data Factory, select the Ingest tile to start the Copy Data tool.

    Screenshot that shows the Azure Data Factory home page.

  2. On the Properties page of the Copy Data tool, choose Built-in copy task under Task type, then select Next.

    &quot;Properties&quot; page

  3. On the Source data store page, complete the following steps:

    1. Click + Create new connection to add a connection.

    2. Select the linked service type that you want to create for the source connection. In this tutorial, we use Azure Blob Storage. Select it from the gallery, and then select Continue.

      Select Blob

    3. On the New connection (Azure Blob Storage) page, specify a name for your connection. Select your Azure subscription from the Azure subscription list and your storage account from the Storage account name list, test connection, and then select Create.

      Configure the Azure Blob storage account

    4. Select the newly created connection in the Connection block.

    5. In the File or folder section, select Browse to navigate to the adftutorial/input folder, select the emp.txt file, and then click OK.

    6. Select the Binary copy checkbox to copy file as-is, and then select Next.

      Screenshot that shows the Source data store page.

  4. On the Destination data store page, complete the following steps:

    1. Select the AzureBlobStorage connection that you created in the Connection block.

    2. In the Folder path section, enter adftutorial/output for the folder path.

      Screenshot that shows the Destination data store page.

    3. Leave other settings as default and then select Next.

  5. On the Settings page, specify a name for the pipeline and its description, then select Next to use other default configurations.

    Screenshot that shows the settings page.

  6. On the Summary page, review all settings, and select Next.

  7. On the Deployment complete page, select Monitor to monitor the pipeline that you created.

    &quot;Deployment complete&quot; page

  8. The application switches to the Monitor tab. You see the status of the pipeline on this tab. Select Refresh to refresh the list. Click the link under Pipeline name to view activity run details or rerun the pipeline.

    Refresh pipeline

  9. On the Activity runs page, select the Details link (eyeglasses icon) under the Activity name column for more details about copy operation. For details about the properties, see Copy Activity overview.

  10. To go back to the Pipeline Runs view, select the All pipeline runs link in the breadcrumb menu. To refresh the view, select Refresh.

  11. Verify that the emp.txt file is created in the output folder of the adftutorial container. If the output folder doesn't exist, the Data Factory service automatically creates it.

  12. Switch to the Author tab above the Monitor tab on the left panel so that you can edit linked services, datasets, and pipelines. To learn about editing them in the Data Factory UI, see Create a data factory by using the Azure portal.

    Select Author tab

Next steps

The pipeline in this sample copies data from one location to another location in Azure Blob storage. To learn about using Data Factory in more scenarios, go through the tutorials.