Set up Apache HBase cluster replication in Azure virtual networks

Learn how to set up Apache HBase replication within a virtual network, or between two virtual networks in Azure.

Cluster replication uses a source-push methodology. An HBase cluster can be a source or a destination, or it can fulfill both roles at once. Replication is asynchronous. The goal of replication is eventual consistency. When the source receives an edit to a column family when replication is enabled, the edit is propagated to all destination clusters. When data replicated from one cluster to another, the source cluster and all clusters that have already consumed the data tracked, to prevent replication loops.

In this article, you set up a source-destination replication. For other cluster topologies, see the Apache HBase reference guide.

The following are HBase replication usage cases for a single virtual network:

• Load balancing. For example, you can run scans or MapReduce jobs on the destination cluster, and ingest data on the source cluster.
• Adding high availability.
• Migrating data from one HBase cluster to another.
• Upgrading an Azure HDInsight cluster from one version to another.

The following are HBase replication usage cases for two virtual networks:

• Setting up disaster recovery.
• Load balancing and partitioning the application.
• Adding high availability.

You can replicate clusters by using script action scripts from GitHub.

Prerequisites

Before you begin this tutorial, you must have an Azure subscription.

Set up the environments

You have three configuration options:

• Two Apache HBase clusters in one Azure virtual network.
• Two Apache HBase clusters in two different virtual networks in the same region.
• Two Apache HBase clusters in two different virtual networks in two different regions (geo-replication).

This article covers the geo-replication scenario.

To help you set up the environments, we have created some Azure Resource Manager templates. If you prefer to set up the environments by using other methods, see:

• Create Apache Hadoop clusters in HDInsight
• Create Apache HBase clusters in Azure Virtual Network

Set up two virtual networks in two different regions

To use a template that creates two virtual networks in two different regions and the VPN connection between the VNets, select the following Deploy to Azure button.

Some of the hard-coded values in the template:

VNet 1

Property	Value
Location	China East
VNet name	<ClusterNamePrevix>-vnet1
Address space prefix	10.1.0.0/16
Subnet name	subnet 1
Subnet prefix	10.1.0.0/24
Subnet (gateway) name	GatewaySubnet (can't be changed)
Subnet (gateway) prefix	10.1.255.0/27
Gateway name	vnet1gw
Gateway type	Vpn
Gateway VPN type	RouteBased
Gateway SKU	Basic
Gateway IP	vnet1gwip

VNet 2

Property	Value
Location	China East
VNet name	<ClusterNamePrevix>-vnet2
Address space prefix	10.2.0.0/16
Subnet name	subnet 1
Subnet prefix	10.2.0.0/24
Subnet (gateway) name	GatewaySubnet (can't be changed)
Subnet (gateway) prefix	10.2.255.0/27
Gateway name	vnet2gw
Gateway type	Vpn
Gateway VPN type	RouteBased
Gateway SKU	Basic
Gateway IP	vnet1gwip

Alternatively, follow below steps to setup two different vnets and VMs manually

1. Create Two VNET (Virtual Network) in different Region
2. Enable Peering in both the VNET. Go to Virtual network created in above steps then click on peering and add peering link of another region. Do it for both the virtual network.
3. Create the latest version of the UBUNTU in each VNET.

Setup DNS

In the last section, the template creates an Ubuntu virtual machine in each of the two virtual networks. In this section, you install Bind on the two DNS virtual machines, and then configure the DNS forwarding on the two virtual machines.

To install Bind, yon need to find the public IP address of the two DNS virtual machines.

1. Open the Azure portal.
2. Open the DNS virtual machine by selecting Resources groups > [resource group name] > [vnet1DNS]. The resource group name is the one you create in the last procedure. The default DNS virtual machine names are vnet1DNS and vnet2NDS.
3. Select Properties to open the properties page of the virtual network.
4. Write down the Public IP address, and also verify the Private IP address. The private IP address shall be 10.1.0.4 for vnet1DNS and 10.2.0.4 for vnet2DNS.
5. Change the DNS Servers for both virtual networks to use Default (Azure-Provided) DNS servers to allow inbound and outbound access to download packages to install Bind in the following steps.

To install Bind, use the following procedure:

1. Use SSH to connect to the public IP address of the DNS virtual machine. The following example connects to a virtual machine at 40.68.254.142:

   ssh sshuser@40.68.254.142
   

   Replace sshuser with the SSH user account you specified when creating the DNS virtual machine.

   Note

   There are a variety of ways to obtain the ssh utility. On Linux, Unix, and macOS, it is provided as part of the operating system. If you are using Windows, consider one of the following options:

   • Bash on Ubuntu on Windows 10
   • Git (https://git-scm.com/)
   • OpenSSH (https://github.com/PowerShell/Win32-OpenSSH/wiki/Install-Win32-OpenSSH)

2. To install Bind, use the following commands from the SSH session:

   sudo apt-get update -y
   sudo apt-get install bind9 -y
   

3. Configure Bind to forward name resolution requests to your on premises DNS server. To do so, use the following text as the contents of the /etc/bind/named.conf.options file:

   acl goodclients {
       10.1.0.0/16; # Replace with the IP address range of the virtual network 1
       10.2.0.0/16; # Replace with the IP address range of the virtual network 2
       localhost;
       localhost;
   };
   
   options {
       directory "/var/cache/bind";
       recursion yes;
       allow-query { goodclients; };
   
       forwarders {
           168.63.129.16; #This is the Azure DNS server
       };
   
       dnssec-validation auto;
   
       auth-nxdomain no;    # conform to RFC1035
       listen-on-v6 { any; };
   };
   

   Important

   Replace the values in the goodclients section with the IP address range of the two virtual networks. This section defines the addresses that this DNS server accepts requests from.

   To edit this file, use the following command:

   sudo nano /etc/bind/named.conf.options
   

   To save the file, use Ctrl+X, Y, and then Enter.

4. From the SSH session, use the following command:

   hostname -f
   

   This command returns a value similar to the following text:

   vnet1DNS.icb0d0thtw0ebifqt0g1jycdxd.ex.internal.chinacloudapp.cn
   

   The icb0d0thtw0ebifqt0g1jycdxd.ex.internal.chinacloudapp.cn text is the DNS suffix for this virtual network. Save this value, as it's used later.

   You must also find out the DNS suffix from the other DNS server. You need it in the next step.

5. To configure Bind to resolve DNS names for resources within the virtual network, use the following text as the contents of the /etc/bind/named.conf.local file:

   // Replace the following with the DNS suffix for your virtual network
   zone "v5ant3az2hbe1edzthhvwwkcse.bx.internal.chinacloudapp.cn" {
           type forward;
           forwarders {10.2.0.4;}; # The Azure recursive resolver
   };
   

   Important

   You must replace the v5ant3az2hbe1edzthhvwwkcse.bx.internal.chinacloudapp.cn with the DNS suffix of the other virtual network. And the forwarder IP is the private IP address of the DNS server in the other virtual network.

   To edit this file, use the following command:

   sudo nano /etc/bind/named.conf.local
   

   To save the file, use Ctrl+X, Y, and then Enter.

6. To start Bind, use the following command:

   sudo service bind9 restart
   

7. To verify that bind can resolve the names of resources in the other virtual network, use the following commands:

   sudo apt install dnsutils
   nslookup vnet2dns.v5ant3az2hbe1edzthhvwwkcse.bx.internal.chinacloudapp.cn
   

   Important

   Replace vnet2dns.v5ant3az2hbe1edzthhvwwkcse.bx.internal.chinacloudapp.cn with the fully qualified domain name (FQDN) of the DNS virtual machine in the other network.

   Replace 10.2.0.4 with the internal IP address of your custom DNS server in the other virtual network.

   The response appears similar to the following text:

   Server:         10.2.0.4
   Address:        10.2.0.4#53
   
   Non-authoritative answer:
   Name:   vnet2dns.v5ant3az2hbe1edzthhvwwkcse.bx.internal.chinacloudapp.cn
   Address: 10.2.0.4
   

   Until now, you can't look up the IP address from the other network without specified DNS server IP address.

Configure the virtual network to use the custom DNS server

To configure the virtual network to use the custom DNS server instead of the Azure recursive resolver, use the following steps:

1. In the Azure portal, select the virtual network, and then select DNS Servers.

2. Select Custom, and enter the internal IP address of the custom DNS server. Finally, select Save.

3. Open the DNS server virtual machine in vnet1, and click Restart. You must restart all the virtual machines in the virtual network to make the DNS configuration to take effect.

4. Repeat steps configure the custom DNS server for vnet2.

To test the DNS configuration, you can connect to the two DNS virtual machines using SSH, and ping the DNS server of the other virtual network by using its host name. If it doesn't work, use the following command to check DNS status:

sudo service bind9 status

Create Apache HBase clusters

Create an Apache HBase cluster in each of the two virtual networks with the following configuration:

• Resource group name: use the same resource group name as you created the virtual networks.
• Cluster type: HBase
• Version: HBase 1.1.2 (HDI 3.6)
• Location: Use the same location as the virtual network. By default, vnet1 is China East, and vnet2 is China East.
• Storage: Create a new storage account for the cluster.
• Virtual network (from Advanced settings on the portal): Select vnet1 you created in the last procedure.
• Subnet: The default name used in the template is subnet1.

To ensure the environment is configured correctly, you must be able to ping the headnode's FQDN between the two clusters.

Load test data

When you replicate a cluster, you must specify the tables that you want to replicate. In this section, you load some data into the source cluster. In the next section, you'll enable replication between the two clusters.

To create a Contacts table and insert some data in the table, follow the instructions at Apache HBase tutorial: Get started using Apache HBase in HDInsight.

Enable replication

The following steps describe how to call the script action script from the Azure portal. For information about running a script action by using Azure PowerShell and the Azure Classic CLI, see Customize HDInsight clusters by using script action.

To enable HBase replication from the Azure portal

1. Sign in to the Azure portal.

2. Open the source HBase cluster.

3. In the cluster menu, select Script Actions.

4. At the top of the page, select Submit New.

5. Select or enter the following information:

   1. Name: Enter Enable replication.
   2. Bash Script URL: Enter https://raw.githubusercontent.com/Azure/hbase-utils/master/replication/hdi_enable_replication.sh.
   3. Head: Ensure this parameter is selected. Clear the other node types.
   4. Parameters: The following sample parameters enable replication for all existing tables, and then copy all data from the source cluster to the destination cluster:

   -m hn1 -s <source hbase cluster name> -d <destination hbase cluster name> -sp <source cluster Ambari password> -dp <destination cluster Ambari password> -copydata
   

   Note

   Use hostname instead of FQDN for both the source and destination cluster DNS name.

   This walkthrough assumes hn1 as active headnode. Check your cluster to identify the active head node.

6. Select Create. The script can take a while to run, especially when you use the -copydata argument.

Required arguments:

Name	Description
-s, --src-cluster	Specifies the DNS name of the source HBase cluster. For example: -s hbsrccluster, --src-cluster=hbsrccluster
-d, --dst-cluster	Specifies the DNS name of the destination (replica) HBase cluster. For example: -s dsthbcluster, --src-cluster=dsthbcluster
-sp, --src-ambari-password	Specifies the admin password for Ambari on the source HBase cluster.
-dp, --dst-ambari-password	Specifies the admin password for Ambari on the destination HBase cluster.

Optional arguments:

Name	Description
-su, --src-ambari-user	Specifies the admin user name for Ambari on the source HBase cluster. The default value is admin.
-du, --dst-ambari-user	Specifies the admin user name for Ambari on the destination HBase cluster. The default value is admin.
-t, --table-list	Specifies the tables to be replicated. For example: --table-list="table1;table2;table3". If you don't specify tables, all existing HBase tables are replicated.
-m, --machine	Specifies the head node where the script action runs. The value should be chosen based on which is the active head node. Use this option when you're running the $0 script as a script action from the HDInsight portal or Azure PowerShell.
-cp, -copydata	Enables the migration of existing data on the tables where replication is enabled.
-rpm, -replicate-phoenix-meta	Enables replication on Phoenix system tables. Use this option with caution. We recommend that you re-create Phoenix tables on replica clusters before you use this script.
-h, --help	Displays usage information.

The print_usage() section of the script has a detailed explanation of parameters.

After the script action is successfully deployed, you can use SSH to connect to the destination HBase cluster, and then verify that the data has been replicated.

Replication scenarios

The following list shows you some general usage cases and their parameter settings:

• Enable replication on all tables between the two clusters. This scenario doesn't require copying or migrating existing data in the tables, and it doesn't use Phoenix tables. Use the following parameters:

  -m hn1 -s <source hbase cluster name> -d <destination hbase cluster name> -sp <source cluster Ambari password> -dp <destination cluster Ambari password>
  

• Enable replication on specific tables. To enable replication on table1, table2, and table3, use the following parameters:

  -m hn1 -s <source hbase cluster name> -d <destination hbase cluster name> -sp <source cluster Ambari password> -dp <destination cluster Ambari password> -t "table1;table2;table3"
  

• Enable replication on specific tables, and copy the existing data. To enable replication on table1, table2, and table3, use the following parameters:

  -m hn1 -s <source hbase cluster name> -d <destination hbase cluster name> -sp <source cluster Ambari password> -dp <destination cluster Ambari password> -t "table1;table2;table3" -copydata
  

• Enable replication on all tables, and replicate Phoenix metadata from source to destination. Phoenix metadata replication is not perfect. Use it with caution. Use the following parameters:

  -m hn1 -s <source hbase cluster name> -d <destination hbase cluster name> -sp <source cluster Ambari password> -dp <destination cluster Ambari password> -t "table1;table2;table3" -replicate-phoenix-meta
  

Set up replication between ESP clusters

Prerequisites

1. Both ESP clusters should be there in the same realm (domain). Check /etc/krb5.conf file default realm property to confirm.
2. Common user should be there who has read and write access to both the clusters
   1. For example, if both clusters have same cluster admin user (For example, admin@abc.example.com), that user can be used to run the replication script.
   2. If both the clusters using same user group, you can add a new user or use existing user from the group.
   3. If both the clusters using different user group, you can add a new user to both use existing user from the groups.

Steps to Execute Replication script

Step 1: Create keytab file for the user using ktutil. $ ktutil

1. addent -password -p admin@ABC.EXAMPLE.COM -k 1 -e RC4-HMAC
2. Ask for password to authenticate, provide user password
3. wkt /etc/security/keytabs/admin.keytab

Step 2: Run script action with -ku option

1. Provide -ku <username> on ESP clusters.

Name	Description
-ku, --krb-user	For ESP clusters, Common Kerberos user, who can authenticate both source and destination clusters

Copy and migrate data

There are two separate script action scripts available for copying or migrating data after replication is enabled:

• Script for small tables (tables that are a few gigabytes in size, and overall copy is expected to finish in less than one hour)

• Script for large tables (tables that are expected to take longer than one hour to copy)

You can follow the same procedure that's described in Enable replication to call the script action. Use the following parameters:

-m hn1 -t <table1:start_timestamp:end_timestamp;table2:start_timestamp:end_timestamp;...> -p <replication_peer> [-everythingTillNow]

The print_usage() section of the script has a detailed description of parameters.

Scenarios

• Copy specific tables (test1, test2, and test3) for all rows edited until now (current time stamp):

  -m hn1 -t "test1::;test2::;test3::" -p "<zookeepername1>;<zookeepername2>;<zookeepername3>:2181:/hbase-unsecure" -everythingTillNow
  

  Or:

  -m hn1 -t "test1::;test2::;test3::" --replication-peer="<zookeepername1>;<zookeepername2>;<zookeepername3>:2181:/hbase-unsecure" -everythingTillNow
  

• Copy specific tables with a specified time range:

  -m hn1 -t "table1:0:452256397;table2:14141444:452256397" -p "<zookeepername1>;<zookeepername2>;<zookeepername3>:2181:/hbase-unsecure"
  

Disable replication

To disable replication, use another script action script from GitHub. You can follow the same procedure that's described in Enable replication to call the script action. Use the following parameters:

-m hn1 -s <source hbase cluster name> -sp <source cluster Ambari password> <-all|-t "table1;table2;...">

The print_usage() section of the script has a detailed explanation of parameters.

Scenarios

• Disable replication on all tables:

  -m hn1 -s <source hbase cluster name> -sp Mypassword\!789 -all
  

  or

  --src-cluster=<source hbase cluster name> --dst-cluster=<destination hbase cluster name> --src-ambari-user=<source cluster Ambari user name> --src-ambari-password=<source cluster Ambari password>
  

• Disable replication on specified tables (table1, table2, and table3):

  -m hn1 -s <source hbase cluster name> -sp <source cluster Ambari password> -t "table1;table2;table3"
  

Next steps

In this article, you learned how to set up Apache HBase replication within a virtual network, or between two virtual networks. To learn more about HDInsight and Apache HBase, see these articles:

• Get started with Apache HBase in HDInsight
• HDInsight Apache HBase overview
• Create Apache HBase clusters in Azure Virtual Network