Quickstart: Create a public load balancer to load balance VMs using the Azure portal
Get started with Azure Load Balancer by using the Azure portal to create a public load balancer and two virtual machines.
- An Azure account with an active subscription. Create a trial subscription.
Sign in to Azure
Sign in to the Azure portal at https://portal.azure.cn.
Create the virtual network
In this section, you'll create a virtual network, subnet, and Azure Bastion host. The virtual network and subnet contains the load balancer and virtual machines. The bastion host is used to securely manage the virtual machines and install IIS to test the load balancer.
In the search box at the top of the portal, enter Virtual network. Select Virtual Networks in the search results.
In Virtual networks, select + Create.
In Create virtual network, enter or select the following information in the Basics tab:
Setting Value Project Details Subscription Select your Azure subscription Resource Group Select Create new.
In Name enter CreatePubLBQS-rg.
Instance details Name Enter myVNet Region Select China North 3
Select the IP Addresses tab or select Next: IP Addresses at the bottom of the page.
In the IP Addresses tab, enter this information:
Setting Value IPv4 address space Enter 10.1.0.0/16
Under Subnet name, select the word default. If a subnet isn't present, select + Add subnet.
In Edit subnet, enter this information:
Setting Value Subnet name Enter myBackendSubnet Subnet address range Enter 10.1.0.0/24
Select Save or Add.
Select the Security tab.
Under BastionHost, select Enable. Enter this information:
Setting Value Bastion name Enter myBastionHost AzureBastionSubnet address space Enter 10.1.1.0/26 Public IP Address Select Create new.
For Name, enter myBastionIP.
Select the Review + create tab or select the Review + create button.
The virtual network and subnet are created immediately. The Bastion host creation is submitted as a job and will complete within 10 minutes. You can proceed to the next steps while the Bastion host is created.
Create load balancer
In this section, you'll create a zone redundant load balancer that load balances virtual machines. With zone-redundancy, one or more availability zones can fail and the data path survives as long as one zone in the region remains healthy.
During the creation of the load balancer, you'll configure:
- Frontend IP address
- Backend pool
- Inbound load-balancing rules
- Health probe
In the search box at the top of the portal, enter Load balancer. Select Load balancers in the search results.
In the Load balancer page, select + Create.
In the Basics tab of the Create load balancer page, enter or select the following information:
Setting Value Project details Subscription Select your subscription. Resource group Select CreatePubLBQS-rg. Instance details Name Enter myLoadBalancer Region Select China North 3. SKU Leave the default Standard. Type Select Public.
Select Next: Frontend IP configuration at the bottom of the page.
In Frontend IP configuration, select + Add a frontend IP configuration.
Enter myFrontend in Name.
Select IPv4 for the IP version.
Select IP address for the IP type.
For more information on IP prefixes, see Azure Public IP prefix.
Select Create new in Public IP address.
In Add a public IP address, enter myPublicIP for Name.
Select Zone-redundant in Availability zone.
In regions with Availability Zones, you have the option to select no-zone (default option), a specific zone, or zone-redundant. The choice will depend on your specific domain failure requirements. In regions without Availability Zones, this field won't appear.
For more information on availability zones, see Availability zones overview.
Select Next: Backend pools at the bottom of the page.
In the Backend pools tab, select + Add a backend pool.
Enter myBackendPool for Name in Add backend pool.
Select myVNet in Virtual network.
Select IP Address for Backend Pool Configuration.
Select Next: Inbound rules at the bottom of the page.
Under Load balancing rule in the Inbound rules tab, select + Add a load balancing rule.
In Add load balancing rule, enter or select the following information:
Setting Value Name Enter myHTTPRule IP Version Select IPv4 or IPv6 depending on your requirements. Frontend IP address Select myFrontend. Backend pool Select myBackendPool. Protocol Select TCP. Port Enter 80. Backend port Enter 80. Health probe Select Create new.
In Name, enter myHealthProbe.
Select TCP in Protocol.
Leave the rest of the defaults, and select OK.
Session persistence Select None. Idle timeout (minutes) Enter or select 15. TCP reset Select Enabled. Floating IP Select Disabled. Outbound source network address translation (SNAT) Leave the default of (Recommended) Use outbound rules to provide backend pool members access to the internet.
Select the blue Review + create button at the bottom of the page.
In this example we'll create a NAT gateway to provide outbound Internet access. The outbound rules tab in the configuration is bypassed as it's optional and isn't needed with the NAT gateway. For more information on Azure NAT gateway, see What is Azure Virtual Network NAT? For more information about outbound connections in Azure, see Source Network Address Translation (SNAT) for outbound connections
Create NAT gateway
In this section, you'll create a NAT gateway for outbound internet access for resources in the virtual network. For other options for outbound rules, check out Network Address Translation (SNAT) for outbound connections.
In the search box at the top of the portal, enter NAT gateway. Select NAT gateways in the search results.
In NAT gateways, select + Create.
In Create network address translation (NAT) gateway, enter or select the following information:
Setting Value Project details Subscription Select your subscription. Resource group Select CreatePubLBQS-rg. Instance details NAT gateway name Enter myNATgateway. Region Select China North 3. Availability zone Select None. Idle timeout (minutes) Enter 15.
Select the Outbound IP tab or select Next: Outbound IP at the bottom of the page.
In Outbound IP, select Create a new public IP address next to Public IP addresses.
Enter myNATgatewayIP in Name.
Select the Subnet tab or select the Next: Subnet button at the bottom of the page.
In Virtual network in the Subnet tab, select myVNet.
Select myBackendSubnet under Subnet name.
Select the blue Review + create button at the bottom of the page, or select the Review + create tab.
Create virtual machines
In this section, you'll create two VMs (myVM1 and myVM2) in two different zones (Zone 1, and Zone 2).
These VMs are added to the backend pool of the load balancer that was created earlier.
In the search box at the top of the portal, enter Virtual machine. Select Virtual machines in the search results.
In Virtual machines, select + Create > Virtual machine.
In Create a virtual machine, enter or select the following values in the Basics tab:
Setting Value Project Details Subscription Select your Azure subscription Resource Group Select CreatePubLBQS-rg Instance details Virtual machine name Enter myVM1 Region Select China North 3 Availability Options Select Availability zones Availability zone Select Zone 1 Security type Select Standard. Image Select Windows Server 2022 Datacenter: Azure Edition - Gen2 Size Choose VM size or take default setting Administrator account Username Enter a username Password Enter a password Confirm password Reenter password Inbound port rules Public inbound ports Select None
Select the Networking tab, or select Next: Disks, then Next: Networking.
In the Networking tab, select or enter the following information:
Setting Value Network interface Virtual network Select myVNet Subnet Select myBackendSubnet Public IP Select None. NIC network security group Select Advanced Configure network security group Skip this setting until the rest of the settings are completed. Complete after Select a backend pool. Delete NIC when VM is deleted Leave the default of unselected. Accelerated networking Leave the default of selected. Load balancing Load balancing options Load-balancing options Select Azure load balancer Select a load balancer Select myLoadBalancer Select a backend pool Select myBackendPool Configure network security group Select Create new.
In the Create network security group, enter myNSG in Name.
Under Inbound rules, select +Add an inbound rule.
Under Service, select HTTP.
Under Priority, enter 100.
In Name, enter myNSGRule
Select Review + create.
Review the settings, and then select Create.
Follow the steps 1 through 7 to create another VM with the following values and all the other settings the same as myVM1:
Setting VM 2 Name myVM2 Availability zone Zone 2 Network security group Select the existing myNSG
Azure provides an default outbound access IP for Azure Virtual Machines which aren't assigned a public IP address, or are in the backend pool of an internal Basic Azure Load Balancer. The default outbound access IP mechanism provides an outbound IP address that isn't configurable.
For more information about default outbound access, see Default outbound access in Azure.
The default outbound access IP is disabled when a public IP address is assigned to the virtual machine, or the virtual machine is placed in the backend pool of a Standard Load Balancer with or without outbound rules. If a Azure Virtual Network NAT gateway resource is assigned to the subnet of the virtual machine, the default outbound access IP is disabled.
Virtual machines created by Virtual Machine Scale sets in Flexible Orchestration mode don't have default outbound access.
For more information about outbound connections in Azure, see Using Source Network Address Translation (SNAT) for outbound connections.
In the search box at the top of the portal, enter Virtual machine. Select Virtual machines in the search results.
On the Overview page, select Connect, then Bastion.
Enter the username and password entered during VM creation.
On the server desktop, navigate to Windows Administrative Tools > Windows PowerShell.
In the PowerShell Window, run the following commands to:
- Install the IIS server
- Remove the default iisstart.htm file
- Add a new iisstart.htm file that displays the name of the VM:
# Install IIS server role Install-WindowsFeature -name Web-Server -IncludeManagementTools # Remove default htm file Remove-Item C:\inetpub\wwwroot\iisstart.htm # Add a new htm file that displays server name Add-Content -Path "C:\inetpub\wwwroot\iisstart.htm" -Value $("Hello World from " + $env:computername)
Close the Bastion session with myVM1.
Repeat steps 1 to 8 to install IIS and the updated iisstart.htm file on myVM2.
Test the load balancer
In the search box at the top of the page, enter Public IP. Select Public IP addresses in the search results.
In Public IP addresses, select myPublicIP.
Copy the item in IP address. Paste the public IP into the address bar of your browser. The custom VM page of the IIS Web server is displayed in the browser.
Clean up resources
When no longer needed, delete the resource group, load balancer, and all related resources. To do so, select the resource group CreatePubLBQS-rg that contains the resources and then select Delete.
In this quickstart, you:
- Created an Azure Load Balancer
- Attached 2 VMs to the load balancer
- Tested the load balancer
To learn more about Azure Load Balancer, continue to: