Tutorial: Order Azure Data Box

For the Data Box service

Before you begin, make sure that:

• You have your Azure storage account with access credentials, such as storage account name and access key.

• The subscription you use for Data Box service is one of the following types:

  • Microsoft Customer Agreement (MCA) for new subscriptions or Microsoft Enterprise Agreement (EA) for existing subscriptions. Read more about MCA for new subscriptions and EA subscriptions.
  • Cloud Solution Provider (CSP). Learn more about Azure CSP program.
  • Microsoft Azure Sponsorship. Learn more about Azure sponsorship program.
  • Microsoft Partner Network (MPN). Learn more about Microsoft Partner Network.

• Ensure that you have owner or contributor access to the subscription to create a device order.

For the Data Box device

Before you begin, make sure that:

• You should have a host computer connected to the datacenter network. Data Box will copy the data from this computer. Your host computer must run a supported operating system as described in Azure Data Box system requirements.
• Your datacenter needs to have high-speed network. We strongly recommend that you have at least one 10-GbE connection. If a 10-GbE connection isn't available, a 1-GbE data link can be used, but copy speeds are impacted.

For the Data Box service

Before you begin, make sure that:

• You have your Azure storage account with access credentials, such as storage account name and access key.

• The subscription you use for Data Box service is one of the following types:

  • Microsoft Customer Agreement (MCA) for new subscriptions or Microsoft Enterprise Agreement (EA) for existing subscriptions. Read more about MCA for new subscriptions and EA subscriptions.
  • Cloud Solution Provider (CSP). Learn more about Azure CSP program.
  • Microsoft Azure Sponsorship. Learn more about Azure sponsorship program.
  • Microsoft Partner Network (MPN). Learn more about Microsoft Partner Network.

• Ensure that you have owner or contributor access to the subscription to create a device order.

For the Data Box device

Before you begin, make sure that:

• You should have a host computer connected to the datacenter network. Data Box will copy the data from this computer. Your host computer must run a supported operating system as described in Azure Data Box system requirements.
• Your datacenter needs to have high-speed network. We strongly recommend that you have at least one 10-GbE connection. If a 10-GbE connection isn't available, a 1-GbE data link can be used, but copy speeds are impacted.

If you don't have an Azure subscription, create a trial account before you begin.

You can sign in to Azure and run Azure CLI commands locally.

For Azure CLI

Before you begin, make sure that:

Install the CLI locally

• Install Azure CLI version 2.0.67 or later. Or install using MSI instead.

Sign in to Azure

Open up a Windows PowerShell command window and sign in to Azure with the az sign in command:

PS C:\Windows> az login

The output confirms a successful sign-in:

You have logged in. Now let us find all the subscriptions to which you have access.
[
   {
      "cloudName": "AzureChinaCloud",
      "homeTenantId": "aaaaaaaa-aaaa-aaaa-aaaa-aaaaaaaaaaaa",
      "id": "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx",
      "isDefault": true,
      "managedByTenants": [],
      "name": "My Subscription",
      "state": "Enabled",
      "tenantId": "aaaaaaaa-aaaa-aaaa-aaaa-aaaaaaaaaaaa",
      "user": {
          "name": "gusp@contoso.com",
          "type": "user"
      }
   }
]

Install the Azure Data Box CLI extension

Before you can use the Azure Data Box CLI commands, you need to install the extension. Azure CLI extensions give you access to experimental and prerelease commands before shipping as part of the core CLI. For more information about extensions, see Use extensions with Azure CLI.

To install the extension for Azure Data Box, run the following command: az extension add --name databox:

    PS C:\Windows> az extension add --name databox

If the extension is installed successfully, the following output is displayed:

    The installed extension 'databox' is experimental and not covered by customer support. Please use with discretion.
    PS C:\Windows>

    # az databox help

    PS C:\Windows> az databox -h

    Group
        az databox

    Subgroups:
        job [Experimental] : Commands to manage databox job.

    For more specific examples, use: az find "az databox"

        Please let us know how we are doing: https://aka.ms/clihats

For the Data Box service

Before you begin, make sure that:

• You have your Azure storage account with access credentials, such as storage account name and access key.

• The subscription you use for Data Box service is one of the following types:

  • Microsoft Customer Agreement (MCA) for new subscriptions or Microsoft Enterprise Agreement (EA) for existing subscriptions. Read more about MCA for new subscriptions and EA subscriptions.
  • Cloud Solution Provider (CSP). Learn more about Azure CSP program.
  • Microsoft Azure Sponsorship. Learn more about Azure sponsorship program.
  • Microsoft Partner Network (MPN). Learn more about Microsoft Partner Network.

• Ensure that you have owner or contributor access to the subscription to create a device order.

For the Data Box device

Before you begin, make sure that:

• You should have a host computer connected to the datacenter network. Data Box will copy the data from this computer. Your host computer must run a supported operating system as described in Azure Data Box system requirements.
• Your datacenter needs to have high-speed network. We strongly recommend that you have at least one 10-GbE connection. If a 10-GbE connection isn't available, a 1-GbE data link can be used, but copy speeds are impacted.

For Azure PowerShell

Before you begin, make sure that you:

• Install Windows PowerShell 6.2.4 or higher.
• Install Azure PowerShell (AZ) module.
• Install Azure Data Box (Az.DataBox) module.
• Sign in to Azure.

Install Azure PowerShell and modules locally

Install or upgrade Windows PowerShell

You need to have Windows PowerShell version 6.2.4 or higher installed. To find out what version of PowerShell is installed, run: $PSVersionTable.

The following sample output confirms that version 6.2.3 is installed:

    PS C:\users\gusp> $PSVersionTable
    
    Name                           Value
    ----                           -----
    PSVersion                      6.2.3
    PSEdition                      Core
    GitCommitId                    6.2.3
    OS                             Microsoft Windows 10.0.18363
    Platform                       Win32NT
    PSCompatibleVersions           {1.0, 2.0, 3.0, 4.0…}
    PSRemotingProtocolVersion      2.3
    SerializationVersion           1.1.0.1
    WSManStackVersion              3.0

If your version is lower than 6.2.4, you need to upgrade your version of Windows PowerShell. To install the latest version of Windows PowerShell, see Install Azure PowerShell.

Install Azure PowerShell and Data Box modules

You need to install the Azure PowerShell modules to use Azure PowerShell to order an Azure Data Box. To install the Azure PowerShell modules:

1. Install the Az PowerShell module.
2. Then install Az.DataBox using the command Install-Module -Name Az.DataBox.

PS C:\PowerShell\Modules> Install-Module -Name Az.DataBox
PS C:\PowerShell\Modules> Get-InstalledModule -Name "Az.DataBox"

Version              Name                                Repository           Description
-------              ----                                ----------           -----------
0.1.1                Az.DataBox                          PSGallery            Microsoft Azure PowerShell - DataBox ser…

Sign in to Azure

Open up a Windows PowerShell command window and sign in to Azure with the Connect-AzAccount command:

PS C:\Windows> Connect-AzAccount -Environment AzureChinaCloud

The following sample output confirms a successful sign-in:

WARNING: To sign in, use a web browser to open the page https://microsoft.com/deviceloginchina and enter the code FSBFZMBKC to authenticate.

Account              SubscriptionName                          TenantId                             Environment
-------              ----------------                          --------                             -----------
gusp@contoso.com     MySubscription                            aaaaaaaa-aaaa-aaaa-aaaa-aaaaaaaaaaaa AzureChinaCloud

PS C:\Windows\System32>

For detailed information on how to sign in to Azure using Windows PowerShell, see Sign in with Azure PowerShell.

To order and device, perform the following steps in the Azure portal:

1. Use your Azure credentials to sign in at this URL: https://portal.azure.cn.

2. Select + Create a resource and search for Azure Data Box. Select Azure Data Box.

   

3. Select Create.

   

4. Check whether Data Box service is available in your region. Enter or select the following information, and then select Apply.

   Setting	Value
   Transfer type	Select Import to Azure.
   Subscription	Select an Enterprise Agreement (EA), Cloud Solution Provider (CSP), or Azure sponsorship subscription for Data Box service. The subscription is linked to your billing account.
   Resource group	Select an existing resource group. A resource group is a logical container for the resources that can be managed or deployed together.
   Source country/region	Select the country/region where your data currently resides.
   Destination Azure region	Select the Azure region where you want to transfer data. For more information, see region availability for Data Box.

   

5. Select the Data Box product to order.

   The maximum usable capacity for a single Data Box order is 80 TB. You can create multiple orders to accommodate larger data sizes.

6. In Order, go to the Basics tab. Enter or select the following information. Then select Next: Data destination>.

   Setting	Value
   Subscription	The subscription is automatically populated based on your earlier selection.
   Resource group	The resource group you selected previously.
   Import order name	Provide a friendly name to track the order. The name can have between 3 to 24 characters that can be a letter, number, or hyphen. The name must start and end with a letter or a number.

   

7. On the Data destination screen, select the Data destination - either storage accounts or managed disks.

   The Data destination tab changes based on your selected destination. See either To use storage accounts or To use managed disks in the following section for instructions.

   To use storage accounts

   Select storage account(s) as the storage destination. The following screen is displayed.

   

   Based on the specified Azure region, select one or more storage accounts from the filtered list of existing storage accounts. Your Data Box can be linked with up to 10 storage accounts. You can also create a new General-purpose v1, General-purpose v2, or Blob storage account.

   • If you select Azure Premium FileStorage accounts, the provisioned quota on the storage account share increases to the size of data being uploaded to the file shares. After the quota is increased, it isn't adjusted again, for example, if for some reason the Data Box can't upload your data.

     This quota is used for billing. After your data is uploaded to the datacenter, you should adjust the quota to meet your needs. For more information, see Understanding billing.

   • If you're using a General Purpose v1, General Purpose v2, or Blob storage account, the Enable copy to archive option is shown. Enabling Copy to archive allows you to send your blobs to the archive tier automatically. Any data uploaded to the archive tier remains offline and needs to be rehydrated before it can be read or modified.

     When Copy to archive is enabled, an extra Archive share is available during the copy process. The extra share is available for SMB, NFS, REST, and data copy service methods.

     

   Note

   Storage accounts with virtual networks are supported. To allow the Data Box service to work with secured storage accounts, enable the trusted services within the storage account network firewall settings. For more information, see how to Add Azure Data Box as a trusted service.

   To use managed disks

   When using Data Box to create Managed disk(s) from on-premises virtual hard disks (VHDs), you also need to provide the following information:

   Setting	Value
   Resource groups	Create new resource groups if you intend to create managed disks from on-premises VHDs. You can use an existing resource group only if the resource group was created previously when creating a Data Box order for managed disks by the Data Box service. Specify multiple resource groups separated by semi-colons. A maximum of 10 resource groups are supported.

   

   The storage account specified for managed disks is used as a staging storage account. The Data Box service uploads the VHDs as page blobs to the staging storage account before converting the page blobs to managed disks and moving them to the resource groups. For more information, see Verify data upload to Azure.

   Note

   Data Box supports copying only 1 MiB aligned, fixed-size .vhd files for creating managed disks. Dynamic VHDs, differencing VHDs, .vmdk or .vhdx files are not supported.

   If a page blob isn't successfully converted to a managed disk, it stays in the storage account and you're charged for storage.

8. Select Next: Security> to continue.

   The Security screen lets you use your own encryption key and your own device and share passwords, and choose to use double encryption.

   All settings on the Security screen are optional. If you don't change any settings, the default settings are applied.

   

9. If you want to use your own customer-managed key to protect the unlock passkey for your new resource, expand Encryption type.

   Configuring a customer-managed key for your Azure Data Box is optional. By default, Data Box uses a Microsoft managed key to protect the unlock passkey.

   A customer-managed key doesn't affect how data on the device is encrypted. The key is only used to encrypt the device unlock passkey.

   If you don't want to use a customer-managed key, skip to Step 15.

   

10. To use a customer-managed key, select Customer managed key as the key type. Then choose Select a key vault and key.

    

11. On the Select key from Azure Key Vault pane:

    • The Subscription is automatically populated.

    • For Key vault, you can select an existing key vault from the dropdown list.

      

      Or select Create new key vault if you want to create a new key vault.

      

      Then, on the Create key vault screen, enter the resource group and a key vault name. Ensure that Soft delete and Purge protection are enabled. Accept all other defaults, and select Review + Create.

      

      Review the information for your key vault, and select Create. Wait for a couple minutes for key vault creation to complete.

      

12. The Select a key pane displays your selected key vault.

    

    If you want to create a new key, select Create new key. You must use an RSA key. The size can be 2048 or greater. Enter a name for your new key, accept the other defaults, and select Create.

    

    You're notified when the key is created in your key vault. Your new key is selected within the Select a key pane.

13. Select the Version of the key to use, and then choose Select.

    

    If you want to create a new key version, select Create new version.

    

    Choose settings for the new key version, and select Create.

    

    The Encryption type settings on the Security screen show your key vault and key.

    

14. Select a user identity with which to manage access to this resource. Choose Select a user identity. In the panel on the right, select the subscription and the managed identity to use. Then choose Select.

    A user-assigned managed identity is a stand-alone Azure resource that can be used to manage multiple resources. For more information, see Managed identity types.

    If you need to create a new managed identity, follow the guidance in Create, list, delete, or assign a role to a user-assigned managed identity using the Azure portal.

    

    The user identity is shown in Encryption type settings.

    :

    Important

    If you use a customer-managed key, you must enable the Get, UnwrapKey, and WrapKey permissions on the key. Without these permissions, order creation will fail. They're also needed during data copy. To set the permissions in Azure CLI, see az keyvault set-policy.

15. If you don't want to use the system-generated passwords that Azure Data Box uses by default, expand Bring your own password on the Security screen.

    The system-generated passwords are secure, and are recommended unless your organization requires otherwise.

    

    • To use your own password for your new device, by Set preference for the device password, select Use your own password, and type a password that meets the security requirements.

    The password must be alphanumeric and contain between 12 to 15 characters. It must also contain at least one uppercase letter, one lowercase letter, one special character, and one number.

    • Allowed special characters: @ # - $ % ^ ! + = ; : _ ( )
    • Characters not allowed: I i L o O 0

    

• To use your own passwords for shares:

  1. By Set preference for share passwords, select Use your own passwords and then Select passwords for the shares.

     

  2. Type a password for each storage account in the order. The password is used on all shares for the storage account.

     The password must be alphanumeric and contain between 12 to 64 characters. It must also contain at least one uppercase letter, one lowercase letter, one special character, and one number.

     • Allowed special characters: @ # - $ % ^ ! + = ; : _ ( )
     • Characters not allowed: I i L o O 0

  3. To use the same password for all of the storage accounts, select Copy to all.

  4. When you finish, select Save.

     

  On the Security screen, you can use View or change passwords to change the passwords.

16. In Security, if you want to enable software-based double encryption, expand Double-encryption (for highly secure environments), and select Enable double encryption for the order.

    

    The software-based encryption is performed in addition to the AES-256 bit encryption of the data on the Data Box.

    Note

    Enabling this option could make order processing and data copy take longer. You can't change this option after you create your order.

    Select Next: Contact details> to continue.

17. In Contact details, select + Add Address.

    

18. On the Add address screen, provide your familiar and family name, the name and postal address of the company, and a valid phone number. Select Validate address. The service validates the address for service availability and notifies you if service is available for that address.

    

    If you selected self-managed shipping, you'll receive an email notification after the order is placed successfully. For more information about self-managed shipping, see Use self-managed shipping.

19. Select Add shipping address after the shipping details are successfully validated. You're returned to the Contact details tab.

20. Beside Email, add one or more email addresses. The service sends email notifications regarding any updates to the order status to the specified email addresses.

    We recommend that you use a group email so that you continue to receive notifications if an admin in the group leaves.

    

    Select Review + Order to continue.

21. In Review + Order:

    1. Review the information in Review + Order related to the order, contact details, notification, and privacy terms.

    2. Check the box corresponding to the agreement to privacy terms. When you select the checkbox, the order information is validated.

    3. Once the order is validated, select Order.

       

    The order takes a few minutes to be created appears similar to the provided example. You can select Go to resource to open the order.

    

1. Write down your settings for your Data Box order. These settings include your personal/business information, subscription name, device information, and shipping information. These settings are used as parameters when running the CLI command to create the Data Box order. The following table shows the parameter settings used for az databox job create:

   Setting (parameter)	Description	Sample value
   resource-group	Use an existing or create a new one. A resource group is a logical container for the resources that can be managed or deployed together.	"myresourcegroup"
   name	The name of the order you're creating.	"mydataboxorder"
   contact-name	The name associated with the shipping address.	"Gus Poland"
   phone	The phone number of the person or business receiving the order.	"14255551234"
   location	The nearest Azure region used to ship the device.	"China East 2"
   sku	The specific Data Box device you're ordering. Valid values are: "DataBox", and "DataBoxDisk"	"DataBox"
   email-list	The email addresses associated with the order.	"gusp@contoso.com"
   street-address1	The street address to which the order is shipped.	"15700 NE 39th St"
   street-address2	The secondary address information, such as apartment number or building number.	"Building 123"
   city	The city to which the device is shipped.	"Shanghai"
   state-or-province	The state to which the device is shipped.	"SH"
   country	The country to which the device is shipped.	"China"
   postal-code	The zip code or postal code associated with the shipping address.	"98052"
   company-name	The name of your company you work for.	"Contoso, LTD"
   storage account	The Azure Storage account from where you want to import data.	"mystorageaccount"
   debug	Include debugging information to verbose logging	--debug
   help	Display help information for this command.	--help -h
   only-show-errors	Only show errors, suppressing warnings.	--only-show-errors
   output -o	Sets the output format. Allowed values: json, jsonc, none, table, tsv, yaml, yamlc. The default value is json.	--output "json"
   query	The JMESPath query string. For more information, see JMESPath.	--query <string>
   verbose	Include verbose logging.	--verbose

2. In your command-prompt of choice or terminal, run az data box job create to create your Azure Data Box order.

   az databox job create --resource-group <resource-group> --name <order-name> --location <azure-location> --sku <databox-device-type> --contact-name <contact-name> --phone <phone-number> --email-list <email-list> --street-address1 <street-address-1> --street-address2 <street-address-2> --city "contact-city" --state-or-province <state-province> --country <country> --postal-code <postal-code> --company-name <company-name> --storage-account "storage-account"
   

   The following sample command illustrates the command's usage:

   az databox job create --resource-group "myresourcegroup" \
                         --name "mydataboxtest3" \
                         --location "chinaeast2" \
                         --sku "DataBox" \
                         --contact-name "Gus Poland" \
                         --phone "14255551234" \
                         --email-list "gusp@contoso.com" \
                         --street-address1 "15700 NE 39th St" \
                         --street-address2 "Bld 25" \
                         --city "Shanghai" \
                         --state-or-province "SH" \
                         --country "China" \
                         --postal-code "98052" \
                         --company-name "Contoso" \
                         --storage-account mystorageaccount
   

   The following sample output confirms successful job creation:

   Command group 'databox job' is experimental and not covered by customer support. Please use with discretion.
   {
     "cancellationReason": null,
     "deliveryInfo": {
        "scheduledDateTime": "0001-01-01T00:00:00+00:00"
   },
   "deliveryType": "NonScheduled",
   "details": null,
   "error": null,
   "id": "/subscriptions/[GUID]/resourceGroups/myresourcegroup/providers/Microsoft.DataBox/jobs/mydataboxtest3",
   "identity": {
     "type": "None"
   },
   "isCancellable": true,
   "isCancellableWithoutFee": true,
   "isDeletable": false,
   "isShippingAddressEditable": true,
   "location": "chinaeast2",
   "name": "mydataboxtest3",
   "resourceGroup": "myresourcegroup",
   "sku": {
     "displayName": null,
     "family": null,
     "name": "DataBox"
   },
   "startTime": "2020-06-10T23:28:27.354241+00:00",
   "status": "DeviceOrdered",
   "tags": {},
   "type": "Microsoft.DataBox/jobs"
   
   }
   PS C:\Windows>
   
   

3. Unless the default output is modified, all Azure CLI commands return a json response. You can change the output format by using the global parameter --output <output-format>. Changing the format to "table" improves output readability.

   The following example contains the same command, but with the modified --output parameter value to alter the formatted response:

   az databox job create --resource-group "myresourcegroup" --name "mydataboxtest4" --location "chinaeast2" --sku "DataBox" --contact-name "Gus Poland" --phone "14255551234" --email-list "gusp@contoso.com" --street-address1 "15700 NE 39th St" --street-address2 "Bld 25" --city "Shanghai" --state-or-province "SH" --country "China" --postal-code "98052" --company-name "Contoso" --storage-account mystorageaccount --output "table"
   

   The following sample response illustrates the modified output format:

   
    Command group 'databox job' is experimental and not covered by customer support. Please use with discretion.
    DeliveryType    IsCancellable    IsCancellableWithoutFee    IsDeletable    IsShippingAddressEditable    Location    Name            ResourceGroup    StartTime                         Status
    --------------  ---------------  -------------------------  -------------  ---------------------------  ----------  --------------  ---------------  --------------------------------  -------------
    NonScheduled    True             True                       False          True                         chinaeast2      mydataboxtest4  myresourcegroup  2020-06-18T03:48:00.905893+00:00  DeviceOrdered
   
   

Do the following steps using Azure PowerShell to order a device:

1. Before creating the import order, fetch your storage account and save the object in a variable.

    $storAcct = Get-AzStorageAccount -Name "mystorageaccount" -ResourceGroup "myresourcegroup"
   

2. Write down your settings for your Data Box order. These settings include your personal/business information, subscription name, device information, and shipping information. These settings are used as parameters when running the PowerShell cmdlet to create the Data Box order. The following table shows the parameter settings used for New-AzDataBoxJob.

   Setting (parameter)	Description	Sample value
   ResourceGroupName [Required]	Use an existing resource group. A resource group is a logical container for the resources that can be managed or deployed together.	"myresourcegroup"
   Name [Required]	The name of the order you're creating.	"mydataboxorder"
   ContactName [Required]	The name associated with the shipping address.	"Gus Poland"
   PhoneNumber [Required]	The phone number of the person or business receiving the order.	"14255551234"
   Location [Required]	The nearest Azure region to you that ships your device.	"ChinaEast2"
   DataBoxType [Required]	The specific Data Box device you're ordering. Valid values are: "DataBox", and "DataBoxDisk"	"DataBox"
   EmailId [Required]	The email addresses associated with the order.	"gusp@contoso.com"
   StreetAddress1 [Required]	The street address to where the order is shipped.	"15700 NE 39th St"
   StreetAddress2	The secondary address information, such as apartment number or building number.	"Building 123"
   StreetAddress3	The tertiary address information.
   City [Required]	The city to which the device is shipped.	"Shanghai"
   StateOrProvinceCode [Required]	The state to which the device is shipped.	"SH"
   CountryCode [Required]	The country to which the device is shipped.	"China"
   PostalCode [Required]	The zip code or postal code associated with the shipping address.	"98052"
   CompanyName	The name of your company you work for.	"Contoso, LTD"
   StorageAccountResourceId [Required]	The Azure Storage account ID from where you want to import data.	<AzstorageAccount>.id

3. Use the New-AzDataBoxJob cmdlet to create your Azure Data Box order as shown in the following example.

    PS> $storAcct = Get-AzureStorageAccount -StorageAccountName "mystorageaccount"
    PS> New-AzDataBoxJob -Location "China East 2" \
                         -StreetAddress1 "15700 NE 39th St" \
                         -PostalCode "98052" \
                         -City "Shanghai" \
                         -StateOrProvinceCode "SH" \
                         -CountryCode "China" \
                         -EmailId "gusp@contoso.com" \
                         -PhoneNumber 4255551234 \
                         -ContactName "Gus Poland" \
                         -StorageAccount $storAcct.id \
                         -DataBoxType DataBox \
                         -ResourceGroupName "myresourcegroup" \
                         -Name "myDataBoxOrderPSTest"
   

   The following sample output confirms job creation:

    jobResource.Name     jobResource.Sku.Name jobResource.Status jobResource.StartTime jobResource.Location ResourceGroup
    ----------------     -------------------- ------------------ --------------------- -------------------- -------------
    myDataBoxOrderPSTest DataBox              DeviceOrdered      07-06-2020 05:25:30   chinaeast2           myresourcegroup
   

After you place the order, you can track the status of the order from Azure portal. Go to your Data Box order and then go to Overview to view the status. The portal shows the order in Ordered state.

If the device isn't available, you receive a notification. If the device is available, Azure identifies the device and prepares it for shipment. The following actions occur during device preparation:

• SMB shares are created for each storage account associated with the device.
• For each share, access credentials such as username and password are generated.
• The device password is generated. This password is used to unlock the device.
• The device is locked to prevent unauthorized access at any point.

When the device preparation is complete, the portal shows the order in a Processed state.

Azure then prepares and dispatches your device via a regional carrier. You receive a tracking number after the device is shipped. The portal shows the order in Dispatched state.

Track a single order

To get tracking information about a single, existing Azure Data Box order, run az databox job show. The command displays information about the order such as, but not limited to: name, resource group, tracking information, subscription ID, contact information, shipment type, and device sku.

az databox job show --resource-group <resource-group> --name <order-name>

The following table shows the parameter information for az databox job show:

The following example contains the same command, but with the output parameter value set to "table":

 PS C:\WINDOWS\system32> az databox job show --resource-group "myresourcegroup" \
                                             --name "mydataboxtest4" \
                                             --output "table"

The following sample response shows the modified output format:

 Command group 'databox job' is experimental and not covered by customer support. Please use with discretion.
 DeliveryType    IsCancellable    IsCancellableWithoutFee    IsDeletable    IsShippingAddressEditable    Location    Name            ResourceGroup    StartTime                         Status
 --------------  ---------------  -------------------------  -------------  ---------------------------  ----------  --------------  ---------------  --------------------------------  -------------
 NonScheduled    True             True                       False          True                         westus      mydataboxtest4  myresourcegroup  2020-06-18T03:48:00.905893+00:00  DeviceOrdered

List all orders

When ordering multiple devices, you can run az databox job list to view all your Azure Data Box orders. The command lists all orders that belong to a specific resource group. Also displayed in the output: order name, shipping status, Azure region, delivery type, order status. Canceled orders are also included in the list. The command also displays time stamps of each order.

az databox job list --resource-group <resource-group>

The following table shows the parameter information for az databox job list:

The following example shows the command with the output format specified as "table":

 PS C:\WINDOWS\system32> az databox job list --resource-group "GDPTest" --output "table"

The following sample response displays the output with modified formatting:

Command group 'databox job' is experimental and not covered by customer support. Please use with discretion.
CancellationReason                                               DeliveryType    IsCancellable    IsCancellableWithoutFee    IsDeletable    IsShippingAddressEditable    Location    Name                 ResourceGroup    StartTime                         Status
---------------------- ----------------------------------------  --------------  ---------------  -------------------------  -------------  ---------------------------  ----------  -------------------  ---------------  --------------------------------  -------------
OtherReason This was a test order for documentation purposes.    NonScheduled    False            False                      True           False                        chinaeast2  gdpImportTest        MyResGrp         2020-05-26T23:20:57.464075+00:00  Cancelled
NoLongerNeeded This order was created for documentation purposes.NonScheduled    False            False                      True           False                        chinaeast2  mydataboxExportTest  MyResGrp         2020-05-27T00:04:16.640397+00:00  Cancelled
IncorrectOrder                                                   NonScheduled    False            False                      True           False                        chinaeast2  mydataboxtest2       MyResGrp         2020-06-10T16:54:23.509181+00:00  Cancelled
                                                                 NonScheduled    True             True                       False          True                         chinaeast2  mydataboxtest3       MyResGrp         2020-06-11T22:05:49.436622+00:00  DeviceOrdered
                                                                 NonScheduled    True             True                       False          True                         chinaeast2  mydataboxtest4       MyResGrp         2020-06-18T03:48:00.905893+00:00  DeviceOrdered
PS C:\WINDOWS\system32>

Track a single order

To get tracking information about a single, existing Azure Data Box order, run Get-AzDataBoxJob. The command displays information about the order such as, but not limited to: name, resource group, tracking information, subscription ID, contact information, shipment type, and device sku.

 Get-AzDataBoxJob -ResourceGroupName <String> -Name <String>

The following table shows the parameter information for Get-AzDataBoxJob:

The following example can be used to retrieve details about a specific order:

Get-AzDataBoxJob -ResourceGroupName "myResourceGroup" -Name "myDataBoxOrderPSTest"

The following example output indicates that the command was completed successfully:

jobResource.Name     jobResource.Sku.Name jobResource.Status jobResource.StartTime jobResource.Location ResourceGroup
----------------     -------------------- ------------------ --------------------- -------------------- -------------
myDataBoxOrderPSTest DataBox              DeviceOrdered      7/7/2020 12:37:16 AM  ChinaEast2               myResourceGroup

List all orders

To view all your Azure Data Box orders, run the Get-AzDataBoxJob cmdlet. The cmdlet lists all orders that belong to a specific resource group. The resulting output also contains additional data such as order name, shipping status, Azure region, delivery type, order status, and the time stamp associated with each order. Canceled orders are also included in the list.

The following example can be used to retrieve details about all orders associated to a specific Azure resource group:

Get-AzDataBoxJob -ResourceGroupName <String>

The following example output indicates that the command was completed successfully:

jobResource.Name     jobResource.Sku.Name jobResource.Status jobResource.StartTime jobResource.Location ResourceGroup
----------------     -------------------- ------------------ --------------------- -------------------- -------------
guspImportTest       DataBox              Cancelled          5/26/2020 11:20:57 PM ChinaEast2           myResourceGroup
mydataboxExportTest  DataBox              Cancelled          5/27/2020 12:04:16 AM ChinaEast2           myResourceGroup
mydataboximport1     DataBox              Cancelled          6/26/2020 11:00:34 PM ChinaEast2           myResourceGroup
myDataBoxOrderPSTest DataBox              Cancelled          7/07/2020 12:37:16 AM ChinaEast2           myResourceGroup
mydataboxtest2       DataBox              Cancelled          6/10/2020 4:54:23  PM ChinaEast2           myResourceGroup
mydataboxtest4       DataBox              DeviceOrdered      6/18/2020 3:48:00  AM ChinaEast2           myResourceGroup
PS C:\WINDOWS\system32>

To cancel and delete an order using the Azure portal, select Overview from within the command bar. To cancel the order, select the Cancel option. To delete a canceled order, select the Delete option.

Cancel an order

Use the az databox job cancel command to cancel a Data Box order. You're required to specify your reason for canceling the order.

The following table provides parameter information for the az databox job cancel command:

The following sample command can be used to cancel a specific Data Box order:

az databox job cancel --resource-group "myresourcegroup" --name "mydataboxtest3" --reason "Our migration plan was modified and we are ordering a device using a different cost center."

The following example output indicates that the command was completed successfully:

Command group 'databox job' is experimental and not covered by customer support. Please use with discretion.
Are you sure you want to perform this operation? (y/n): y

Delete an order

After you cancel an Azure Data Box order, use the az databox job delete command to delete the order.

The following table shows the parameter information for az databox job delete:

The following example can be used to delete a specific Data Box order after being canceled:

az databox job delete --resource-group "myresourcegroup" --name "mydataboxtest3" --yes --verbose

The following example output indicates that the command was completed successfully:

Command group 'databox job' is experimental and not covered by customer support. Please use with discretion.
command ran in 1.142 seconds.

Cancel an order

You can cancel an Azure Data Box order using the Stop-AzDataBoxJob cmdlet. You're required to specify your reason for canceling the order.

The following table shows the parameter information for Stop-AzDataBoxJob:

The following example can be used to delete a specific Data Box order after being canceled:

Stop-AzDataBoxJob -ResourceGroupName myResourceGroup \
    -Name "myDataBoxOrderPSTest" \
    -Reason "I entered erroneous information and need to cancel and re-order."

The following example output indicates that the command was completed successfully:

Confirm
"Cancelling Databox Job "myDataBoxOrderPSTest
[Y] Yes  [N] No  [S] Suspend  [?] Help (default is "Y"): y

Delete an order

After canceling an Azure Data Box order, you can delete it using the Remove-AzDataBoxJob cmdlet.

The following table shows parameter information for Remove-AzDataBoxJob:

The following example can be used to delete a specific Data Box order after canceling:

Remove-AzDataBoxJob -ResourceGroup "myresourcegroup" \
    -Name "mydataboxtest3"

The following example output indicates that the command was completed successfully:

Confirm
"Removing Databox Job "mydataboxtest3
[Y] Yes  [N] No  [S] Suspend  [?] Help (default is "Y"): y