Quickstart: Send telemetry from a device to an IoT hub and read it with a service application (.NET)

Article
02/03/2023

IoT Hub is an Azure service that enables you to ingest high volumes of telemetry from your IoT devices into the cloud for storage or processing. In this quickstart, you send telemetry from a simulated device application, through IoT Hub, to a service application for processing.

The quickstart uses two pre-written C# applications, one to send the telemetry and one to read the telemetry from the hub. Before you run these two applications, you create an IoT hub and register a device with the hub.

If you don't have an Azure subscription, create a trial account before you begin.

Prerequisites

The two sample applications you run in this quickstart are written using C#. You need the .NET Core SDK 3.1 or greater on your development machine.

You can download the .NET Core SDK for multiple platforms from .NET.

You can verify the current version of C# on your development machine using the following command:

dotnet --version

Note

.NET Core SDK 3.1 or greater is recommended to compile the Event Hubs service code used to read telemetry in this quickstart.

Download the Azure IoT C# samples from https://github.com/Azure-Samples/azure-iot-samples-csharp/archive/master.zip and extract the ZIP archive.
Make sure that port 8883 is open in your firewall. The device sample in this quickstart uses MQTT protocol, which communicates over port 8883. This port may be blocked in some corporate and educational network environments. For more information and ways to work around this issue, see Connecting to IoT Hub (MQTT).

You can use the local Azure CLI.

If you prefer, install the Azure CLI to run CLI reference commands.
Local Azure CLI, see how to install the Azure CLI. If you're running on Windows or macOS, consider running Azure CLI in a Docker container. For more information, see How to run the Azure CLI in a Docker container.
- Sign in to the Azure CLI by using the az login command. To finish the authentication process, follow the steps displayed in your terminal. For other sign-in options, see Sign in with the Azure CLI.
- When you're prompted, install the Azure CLI extension on first use. For more information about extensions, see Use extensions with the Azure CLI.
- Run az version to find the version and dependent libraries that are installed. To upgrade to the latest version, run az upgrade.

Note

This article uses the newest version of the Azure IoT extension, called azure-iot. The legacy version is called azure-cli-iot-ext.You should only have one version installed at a time. You can use the command az extension list to validate the currently installed extensions.

Use az extension remove --name azure-cli-iot-ext to remove the legacy version of the extension.

Use az extension add --name azure-iot to add the new version of the extension.

To see what extensions you have installed, use az extension list.

Create an IoT hub

This section describes how to create an IoT hub using the Azure portal.

Sign in to the Azure portal.
On the Azure homepage, select the + Create a resource button.
From the Categories menu, select Internet of Things, and then select IoT Hub.

On the Basics tab, complete the fields as follows:

Important

Because the IoT hub will be publicly discoverable as a DNS endpoint, be sure to avoid entering any sensitive or personally identifiable information when you name it.

Property	Value
Subscription	Select the subscription to use for your hub.
Resource group	Select a resource group or create a new one. To create a new one, select Create new and fill in the name you want to use.
IoT hub name	Enter a name for your hub. This name must be globally unique, with a length between 3 and 50 alphanumeric characters. The name can also include the dash (`'-'`) character.
Region	Select the region, closest to you, where you want your hub to be located. Some features, such as IoT Hub device streams, are only available in specific regions. For these limited features, you must select one of the supported regions.
Tier	Select the tier that you want to use for your hub. Tier selection depends on how many features you want and how many messages you send through your solution per day. The free tier is intended for testing and evaluation. The free tier allows 500 devices to be connected to the hub and up to 8,000 messages per day. Each Azure subscription can create one IoT hub in the free tier. To compare the features available to each tier, select Compare tiers. For more information, see Choose the right IoT Hub tier for your solution.
Daily message limit	Select the maximum daily quota of messages for your hub. The available options depend on the tier you've selected for your hub. To see the available messaging and pricing options, select See all options and select the option that best matches the needs of your hub. For more information, see IoT Hub quotas and throttling.

Screen capture that shows how to create an IoT hub in the Azure portal.

Select Next: Networking to continue creating your hub.

On the Networking tab, complete the fields as follows:

Property	Value
Connectivity configuration	Choose the endpoints that devices can use to connect to your IoT hub. Accept the default setting, Public endpoint, for this example. You can change this setting after the IoT hub is created. For more information, see Managing public network access for your IoT hub.

Screen capture that shows how to choose the endpoints that can connect to a new IoT hub.

Select Next: Management to continue creating your hub.

Accept the default settings here. If desired, you can modify any of the following fields:
- Pricing and scale tier: Tier selection depends on how many features you want and how many messages you send through your solution per day. The free tier is intended for testing and evaluation. The free tier allows 500 devices to be connected to the hub and up to 8,000 messages per day. Each Azure subscription can create one IoT hub in the free tier. For details about other tier options, see Choosing the right IoT Hub tier.
  
  If you're working through a quickstart, select the free tier.
- IoT Hub units: The number of messages allowed per unit per day depends on your hub's pricing tier. For example, if you want the hub to support ingress of 700,000 messages, choose two S1 tier units.
- Role-based access control: This property decides how you manage access to your IoT hub. Allow shared access policies or choose only role-based access control. For more information, see Control access to IoT Hub by using Azure Active Directory.
- Device-to-cloud partitions: This property relates the device-to-cloud messages to the number of simultaneous readers of the messages. Most hubs need only four partitions.
Note

Prices shown are for example purposes only.
Select Next: Tags to continue to the next screen.

Tags are name/value pairs. You can assign the same tag to multiple resources and resource groups to categorize resources and consolidate billing. In this document, you won't be adding any tags. For more information, see Use tags to organize your Azure resources.
Select Next: Review + create to review your choices.
Select Create to start the deployment of your new hub. Your deployment will be in progress a few minutes while the hub is being created. Once the deployment is complete, select Go to resource to open the new hub.

Register a device

A device must be registered with your IoT hub before it can connect. In this quickstart, you use the Azure CLI to register a simulated device.

Run the following command in Azure Cloud Shell to create the device identity.

YourIoTHubName: Replace this placeholder below with the name you chose for your IoT hub.

MyDotnetDevice: This is the name of the device you're registering. It's recommended to use MyDotnetDevice as shown. If you choose a different name for your device, you'll also need to use that name throughout this article, and update the device name in the sample applications before you run them.
```
az iot hub device-identity create --hub-name {YourIoTHubName} --device-id MyDotnetDevice
```
Run the following commands to get the device connection string for the device you just registered:

YourIoTHubName: Replace this placeholder below with the name you chose for your IoT hub.
```
az iot hub device-identity connection-string show --hub-name {YourIoTHubName} --device-id MyDotnetDevice --output table
```
Make a note of the device connection string, which looks like:

HostName={YourIoTHubName}.azure-devices.cn;DeviceId=MyDotnetDevice;SharedAccessKey={YourSharedAccessKey}

You'll use this value later in the quickstart.
You also need the Event Hubs-compatible endpoint, Event Hubs-compatible path, and service primary key from your IoT hub to enable the service application to connect to your IoT hub and retrieve the messages. The following commands retrieve these values for your IoT hub:

YourIoTHubName : Replace this placeholder below with the name you choose for your IoT hub.
```
az iot hub show --query properties.eventHubEndpoints.events.endpoint --name {YourIoTHubName}

az iot hub show --query properties.eventHubEndpoints.events.path --name {YourIoTHubName}

az iot hub policy show --name service --query primaryKey --hub-name {YourIoTHubName}
```
Make a note of these three values, which you'll use later in the quickstart.

Send simulated telemetry

The simulated device application connects to a device-specific endpoint on your IoT hub and sends simulated temperature and humidity telemetry.

In a local terminal window, navigate to the root folder of the sample C# project. Then navigate to the iot-hub\Quickstarts\SimulatedDevice folder.
In the local terminal window, run the following commands to install the required packages for simulated device application:
```
dotnet restore
```
In the local terminal window, run the following command to build and run the simulated device application with the device connection string you made a note of earlier:
```
dotnet run -- {DeviceConnectionString}
```
The following screenshot shows the output as the simulated device application sends telemetry to your IoT hub:

Read the telemetry from your hub

The service application connects to the service-side Events endpoint on your IoT Hub. The application receives the device-to-cloud messages sent from your simulated device. An IoT Hub service application typically runs in the cloud to receive and process device-to-cloud messages.

In another local terminal window, navigate to the root folder of the sample C# project. Then navigate to the iot-hub\Quickstarts\ReadD2cMessages folder.
In the local terminal window, run the following command to install the required libraries for the application:
```
dotnet restore
```
In the local terminal window, run the following command to see the parameter options.
```
dotnet run
```
In the local terminal window, run one of the following command to build and run the application with the :
```
dotnet run -- -c {EventHubConnectionString}
```
or
```
dotnet run -- -e {EventHubCompatibleEndpoint} -n {EventHubName} -s {SharedAccessKey}
```
The following screenshot shows the output as the service application receives telemetry sent by the simulated device to the hub:

Clean up resources

If you will be continuing to the next recommended article, you can keep the resources you've already created and reuse them.

Otherwise, you can delete the Azure resources created in this article to avoid charges.

Important

Deleting a resource group is irreversible. The resource group and all the resources contained in it are permanently deleted. Make sure that you do not accidentally delete the wrong resource group or resources. If you created the IoT Hub inside an existing resource group that contains resources you want to keep, only delete the IoT Hub resource itself instead of deleting the resource group.

To delete a resource group by name:

Sign in to the Azure portal and select Resource groups.
In the Filter by name textbox, type the name of the resource group containing your IoT Hub.
To the right of your resource group in the result list, select ... then Delete resource group.
You will be asked to confirm the deletion of the resource group. Type the name of your resource group again to confirm, and then select Delete. After a few moments, the resource group and all of its contained resources are deleted.

Next steps

In this quickstart, you set up an IoT hub, registered a device, sent simulated telemetry to the hub using a C# application, and read the telemetry from the hub using a simple service application.

To learn how to control your simulated device from a service application, continue to the next quickstart.

Quickstart: Control a device connected to an IoT hub